There is this extremely annoying issue with my website:

https://movq.de/v/4acced3c8e/scroll.mp4

Notice how I’m scrolling, then switching to another tab, switching back, and then the scrolling position is different?

What the hell could cause this? It’s not always like this and I have only seen it in Firefox so far (but I very rarely use Chromium anyway), and this really happens a lot on my site but not on others.

Any ideas? Did I screw up the CSS somehow? 🤔

@klaxzy@klaxzy.net This is a good idea. I do something very simialr.

Website might come back soon, although probably mostly unchanged. I have no idea how to stop the bots. 🤷‍♀️ So I’ll just gonna live with it? Is that the key to happiness™? 🤷‍♀️

@david@daiwei.me No idea 🤷 We shall see! haha 😂

Gonna recreate the classic [Break out](https://en.wikipedia.org/wiki/Breakout_(video_game) game this weekend for the Mills Games Cabinet – Anyone else got any ideas, requests? 🤔 #games #ebitengine

@david@daiwei.me Thanks, mate! I just finished my two full version marking gauges. And I’m rather pleased with them, I think they turned out great if I say so myself.

https://lyse.isobeef.org/tmp/streichmass-mit-messerrad/

The beech fences (80 and 100mm long) were part of a former table frame that I cut down. I plugged the dowel holes with, well, dowels. The horrific looking one was the stuck original one, though. Luckily, it’s a hell lot worse on camera than in person. If you take a close look, you’ll also be able to see the large but slight chamfers one one side each that I just left alone.

I really like beech wood. It looks beautiful, is rather heavy (at least in comparison to spruce which I typically use) and thus rock solid, is also a blast to plane and the list goes on. I sanded it with 180 grit and it’s smooth as a baby’s bottom.

The 25mm beech round stocks that house the brass knurled nuts are now roughly 4cm long. That’s one thing I wanted to change right after my first experience. If they were rounded or chamfered more, it would probably be even nicer for the fingers when using the marking gauge. They’re sunken in roughly 3mm in the fences. A forstner bit made quick work. This simplified alignment during glue-up a lot. Will definitely do that again if I happen to build more. I could fully concentrate on the grain orientation and it didn’t shift around.

Just like in the prototype, I used 8mm aluminium solid round bar again for one of the marking gauges. It’s also about 15cm in length. I figure that’s enough. The bought marking gauge has a twenty-something and some change steel rod. So far, all my markings didn’t even exceed probably 50mm.

I found the 8mm brass pipe laying around on the workshop. Didn’t know anymore I had it for ages. Unfortunately, the wall thickness is below a millimeter, so my 6mm wooden dowels are sliding in there. Thus, I put 8mm dowels in my drill chuck and reduced the diameter with a rasp. I went a tiny bit too far, the press fit is on the loose side. When drilling with a 2mm drill (I did that on purpose to hopefully cause the dowel to expand a bit more in the pipe, typically the tap hole for M3 is 2.5mm) and tapping M3, the downsized and glued in dowel slipped down the pipe. Should have used construction adhesive or something along those lines. Anyway, I might replace it with a solid one. I consider this a half-successful experiment. I fear that an unfavorable grain direction might pull out the cutting wheel during use. Let’s see.

The finish of all three is boiled linseed oil. It looks nice, but oh by, this smell. I really dislike it. My hands stink even after washing them several times. I still got several liters left, so I have the dubious joy to use it on many, many other projects to come.

Oh, one last thing. Didn’t manage to drill the tiny holes for my M3x16 bolts perfectly in center like for the prototype. They’re a tiny bit off. Also, on the longer fenced marking gauge, the hole for the knurled nut is a little to the side and at an angle. No idea how I messed this up. Luckily, it’s just a look thing but doesn’t impair use.

@david@daiwei.me Oh, that is a good idea. This could be included here, yeah. 🤔

@prologic@twtxt.net Hmmm, I have no idea how to solve that problem. 😅 Some jenny stuff aside, I received zero bug reports or code contributions since leaving GitHub in 2018.

I thought I had made that super easy, because you can just send me an email – no sign-up process, nothing. But that’s way too old-school, people don’t know how to use git format-patch (let alone git send-email) and they also don’t understand that they can just send me a link to their forked Git repo (which can be hosted anywhere). Git is super flexible and powerful, but those features are hardly ever used.

Maybe people even need some kind “reward”, or “fame”. Like those “achievements” that you can unlock on GitHub. (Something to put in their CV … ?)

Oh god 🤣 I mean I had this idea to re-invent “Git hosting”, but failed. Maybe I’ll try it again. I dunno. The thing is I hardly get “Issues” really, only when I ask nicely, of folks I know every well 🤣 So think at much “smaller scale” we need a different solution, and I think @movq@www.uninformativ.de is on to something, but not to the extend implemented, somewhere in the middle I think? 🤔

@movq@www.uninformativ.de Hmmm you’ve given me an idea 🧐

@ponderpoints@twtpub.com Welcome to Yarn.social 👋 Interesting video, I actually watched it all the way through, riverting stuff really and quite well put together. The idea of “subjective experience” is a rather complicated thing to describe and you’re right, how do we even know we have them? 🤔

@david@daiwei.me I had to look these up, horror isn’t my genre at all. :-D No idea what the cool kids use today, but I still have zsh as my interactive shell. For shell scripts, though, I try to stick to POSIX and only resort to bash if really needed or it would be too cumbersome.

I trip over this in our code at work all the time.

Python has this concept of “properties”:

class Oink:
    def __init__(self):
        self._foo = 3

    @property
    def my_property(self):
        return self._foo


a = Oink()
print(a.my_property)

my_property() is a method but it can be used as if it were a field.

This can also be used to define a setter:

class Oink:
    def __init__(self):
        self._foo = 3

    @property
    def my_property(self):
        return self._foo

    @my_property.setter
    def my_property(self, value):
        self._foo = 123 * value

Because, for some reason, Python people don’t like getters and setters. Instead, they hide it behind a property.

The result is, when you read this:

a.my_property = 5
print(a.my_property)

You have no idea that this actually calls a method.

@david@daiwei.me That’s a good thing. I still use it heavily, but I also realize that it is addictive. This whole idea of getting likes and boosts is horrible. Seeing “number goes up” is inherently addictive design, if you ask me. This should never have been added to a Free Platform like Mastodon, and I’m glad that twtxt doesn’t have anything like it.

Some further ideas/enhancements for Twtxt App …

• On the “Followers” tab, new followers should appear at the top I thnik.
  
• On the Following/Followers, each feed should be clickable/tappable.
  
  • Maybe also tidy it up a bit, displaying the full raw Feed URI is messy.

Just for security as required by law.

LOL 🤣 Was this someone’s idea of a joke? 🤔

@bender@twtxt.net No idea. I can only tell you that the correct hash would have been rwzz277nkyju for this line:

[2026-07-11 14:47:17+00:00] [(#5bpwpdcjnhcz) <a href="https://txt.sour.is/external?uri=https://daiwei.me/twtxt.txt">@david<em>@daiwei.me</em></a> (This thread is broken again on my end. Another bug or fix not released yet? 😅)]

We slept in the forest. It was really great except of my mate’s fucking terror dog who was barking and snarling the entire night to each and every sound. I had maybe half an hour of sleep in total. Despite that, it was pleasantly warm. Well, the night, that is. The heat was brutal during the days. Literally streams of sweat were running down on us on the way there in the evening and back in the morning.

Surprisingly, there weren’t any mozzies around at night, I would have lost all safe bets. On the way there, my mate convinced me to take a shortcut through the taller and taller growing grass. It’s been some time that somebody traveled on this track, so we had to search around a bit for the overgrown path where we could cross the mostly dried up creek. In the beginning I said that this will be a bad idea. Lo and behold, I discovered a tick on my inner upper leg the next morning. Luckily, I got it out with my tick hook on the first attempt.

https://lyse.isobeef.org/walduebernachtung-2026-07-09-10/

@itsericwoodward@itsericwoodward.com what the hell!!? I have no idea how that happened. 😆 Thank you!

I don’t know why, but either Jenny’s behaving different after the last update, or I Fucked up something and I have no Idea how to fix it.

Symptoms:

• I don’t have copies of my New Posts in my Maildir after posting them (as in I don’t see them in neomutt’s inbox).
  
• Nor fetch or fetch context (if they get replied to) seem to fech them auto-magically.
  
• I had to do a full whipe (~/Maildir/twtxt and ~/.cache/jenny) in order to get them fetched back.

@david@daiwei.me Some entries can be probably simplified with just *bot*. :-) (But I don’t use Caddy, so no idea about case (in)sensitivity.

That reminds me, I should do something similar with my Nginx.

@movq@www.uninformativ.de @bender@twtxt.net Indeed! No idea why this isn’t the default in the first place.

The firefly season is ending. I only saw 200 of them or so. There was one female directly on the forest road. If only I brought my camera and tripod, that would have worked out I reckon. I had my torch with me and this looked really cool.

Dusk took forever today. It was really long light out there. Full moon is tomorrow.

On the way back, there was suddenly a load clatter and crashing sound 100 meters away from me. I didn’t see anything, but a tree fell over in the forest out of the blue. Fuck me dead, that was scary as hell. Luckily, I was already on the main road, only meadows around me. It’s the second time I witnessed a tree accidentally coming down. The first one was during the most expensive hail storm in our area so far in 2011 behind me when setting up a summer camp. The weather changed in less than 15 minutes.

Maybe not such a good idea to go out so late alone. :-? Any rustling in the forest immediately reminded me of the boar the other day. Luckily, always false alarm. Still a bit terrified from that event.

@movq@www.uninformativ.de CEF turns out to be pretty easy. I had to write a bit of C and Go to bridge, but once that got going I was able to write it into my pure Go go-wayland wlui library for final rendering. The delegating the entire CEF part was a good idea though because it keeps all the complexity in a container Image, leaving me with just the Go + C stubs/interface and SHM/IPC parts.

@movq@www.uninformativ.de Good idea, I should probably do the same for my photo galleries.

I found my tripod and headed into the woods. There was a ton of glow. \o/ The fireflies were everywhere, super cool. It looked so amazing, especially with all the flying boys. There was one amazing spot in particular, I had 80-100 individuals in my view at once. Absolutely breathtaking. Unfortunately, the mozzies were also delighted about my visit.

I tried my best, but it’s impossible to capture anything on film with my equipment. The fireflies are just way too dim. In the end, I managed to get some very bright girls in the bush. That’s the best I could do, but still really bad. Sorry @bender@twtxt.net. :-(

https://lyse.isobeef.org/gluehwuermchen-2026-06-19/

And no idea what the heck is going on with the CSS there. Anyway. Garbage to trash, seems fitting. ;-)

Getting the vim key bindings to work for focus switching in this modal dialog took me forever. Only cursors and (Shift+)Tab are supported out of the box. I absolutely understand that, it’s fine. I installed an input handler on the dialog, but the focus always stayed the same.

After two wasted hours, I was in despair to copy the tview.Modal into my own code base. Of course, I had to fix all the private tview field accesses first. But even installing the input handler directly on the buttons themselves did not work. Even though, the handler was definitely executed, the focus did not shift. Forcing redraws as a last resort also did not work.

Looking through all the messy chained input handling, I eventually stumbled across another place in the tview.Form, which is internally used by tview.Modal. This messed around with app focus receptions and input handlers. This gave me the idea to make the tview.Application refocus my modal dialog after I told the modal dialog which button to select. And would you look at that, this did the trick! I haven’t completely figured out what is going on exactly, but I could get rid of my Modal clone again.

I always go through hell with focus handling in tview. Each and every time. It just does not feel natural to me. Complete brainfuck to wrap my head around. The Urwid API felt sooo much more refined, it never was an issue. It just works. In fact, I cannot think of any other TUI library that has remotely the same pain level when it comes to focusing widgets as tview.

Now I’m curious how movwin deals with that. ;-)

@lyse@lyse.isobeef.org having seeing, and played with fireflies as a child I envy you. We have none around here. Children have no idea what a firefly is. I mean, they do, but vague, and based on videos and telly.

Meta Employees Absolutely Hate Zuckerberg’s Plan for a Companywide AI Hackathon
“I’m not sure that this company supports a hackathon culture anymore,” one employee posted in a forum open to the entire staff. ⌘ Read more

Her physio was horrified, but Becca didn’t let a torn knee ligament stop her reaching a milestone
She hated hiking as a child – and had no idea what she was doing once she started climbing – but Becca Lunnon just made history on Tasmania’s mountains. ⌘ Read more

New poll reveals just what Americans really think about alien life
A recent CBS News poll took a deep dive into what people across the US believe with regard to extraterrestrial life. The idea that aliens might be vis… ⌘ Read more

A man kept asking his flatmate on dates. Talika’s idea might fix the problem
Years of soaring property prices have meant the age of renters extend well beyond young adults and into new generations. But for women, it can come with additional hurdles. ⌘ Read more

Australia news as it happened: Coalition leaders rubbish idea of One Nation non-compete clause; Optus breached privacy rules; JB Hi-Fi to refund customers over misleading prices
Follow along as we bring you the latest live news updates from Australia and beyond. ⌘ Read more

The youth skate park on a collision course with eastern suburbs residents
For 13 years, the idea has progressed and halted, in a battle that has involved everyone from activist neighbours to a prime minister. Now, construction has begun. ⌘ Read more

@lyse@lyse.isobeef.org Not a fan of Mittelaltermärkte, but that sounds like an interesting idea. I wonder if they end up shooting each other on accident. 😅

30 Best Father’s Day Gifts for Dads (2026)
Dads are traditionally tough to shop for—let me help with these handpicked gift ideas for fathers with great taste. ⌘ Read more

@lyse@lyse.isobeef.org Switching to Make might be a good idea, though, because the whole thing is purely sequential at the moment … It takes close to 20 seconds (including the w3c verification which runs the Java checker). It’s not unusable, but it could be better. 😅

To fix housing, we must try something radical. Here are three ideas to shift the dial
Australia already has more homes than households. It’s just that too many of our homes cannot house the people who need them. ⌘ Read more

@prologic@twtxt.net As have I. 🤔 I mean, since I left GitHub, I got basically 0 pull requests anyway.

Even during my time using GitHub, I noticed that “drive-by PRs” are rarely a good idea. People don’t really know/understand the code or the design principles/goals, so I often turned down PRs. Or I accepted them and was grumpy afterwards. 😅

What does work is having a team of maintainers/devs. The only question is: How do you build such a team if you don’t accept PRs? That’s going to be the interesting part.

Now that is an interesting move:

https://ladybird.org/posts/changing-how-we-develop-ladybird/

Maybe this is how all Free Software will look like in the future. It might not be the worst idea … ? 🤔

Why Apple Might Put Cameras Into Its Next AirPods
From battery life to privacy, there are many hurdles to the idea taking off. ⌘ Read more

@movq@www.uninformativ.de “You know what this is?” A mass produced, Chinese made, rubber ducky? LOL. Sorry, had to do it. I had no idea who Maria was/is (have a vague one now). If you collect those, I can send you some! :-)

Years ago, I used Kate, no, not somebody’s wife, but the KDE Advanced Text Editor, to export source code files and fragments into HTML with syntax highlighting. I think that’s where I got the initial <b> idea from. There were also bucketloads of <span style='color:#644a9b;'> all over the place, even inside <b>. No CSS classes defined upfront, all colors inlined. The final rendering in the browser looked great, but the source code ugly as hell in my opinion. However, I’m thankful for hinting me at <b>. I think this kicked off everything. :-)

Superintelligence: The Idea That Eats Smart People (2016)
Article URL: https://idlewords.com/talks/superintelligence.htm

Comments URL: https://news.ycombinator.com/item?id=48360137

Points: 6

# Comments: 0 ⌘ Read more

More Australians report feeling lonely. This WA program is trialling a new idea to help
If we are serious about improving health outcomes and reducing pressure on our health system in Western Australia, we must start recognising community connection as a form of care. ⌘ Read more

Haha, someone had a similar idea … https://lpcvoid.com/blog/0018_why_i_am_against_genai/index.html

@prologic@twtxt.net Ahh, I see. Okay, I’m with you there. On this high level, I can understand how the thing works.

Maybe my wording isn’t good. 🤔 Let’s take a real life example from what we do at work.

There’s this AI chatbot. It gets support requests from users, so the user says something like “I need access to a particular system”. This triggers the bot to “run” the instructions stored in a large Markdown file, like “check if the user is authorized to do this, then issue the following API requests”, and so on. This is essentially like running a little script, except it’s written in natural language (German) and there’s no “script interpreter” but just the AI.

Now, suppose that the AI doesn’t quite do what was intended. There’s some subtle bug. How do you debug this? How do you find out how the AI came to the “conclusion” to run step A instead of step B? And how do you find out how exactly you have to change your prompt so this doesn’t happen again next time?

If this was an actual script/program instead of AI, you could repeat the request and attach a debugger or throw in some printf() or whatever. How do you do that kind of thing with AI? How do you pinpoint exactly what the problem was?

(Or is this just a stupid idea? Do we have to give up that way of thinking when using AI? Is the era of debuggability over?)

@arne@uplegger.eu This is interesting. Sorry I missed this, I just found this post of yours and wanted to contribute 😅 Here’s something interesting about me… I don’t ever talk to myself, like ever. I have no, what they call, “inner monologue”. Maybe I’m odd, but my wife asked me this very same question a while back and I said the same, there is never anything in my head except ideas, visuals or sounds, sometimes all at once, but never an inner monologue of “talking to myself”.

24 Best Father’s Day Gifts for Dads (2026)
Dads are traditionally tough to shop for—let me help with these handpicked gift ideas for fathers with great taste. ⌘ Read more

‘This is not about whether people like or hate Peter’: Inside the audacious idea of V’landys ruling the NRL
The next few months of the NRL chairman’s life will be dictated by three key numbers: 16, two, and $4 billion. ⌘ Read more

Ask HN: Entrepreneurs, how long did it take you to succeed?
How long did it take? How many ideas did you go through? What made you stick to an idea vs pivot?

Comments URL: https://news.ycombinator.com/item?id=48315206

Points: 4

# Comments: 0 ⌘ Read more

Of course, @movq@www.uninformativ.de! Most of my points are also included in your list.

First of all, programming is what I really do enjoy the most. So, it doesn’t make any sense at all to not do this anymore. “But you could use your now free time to do something much cooler and more valuable!”, others might reply. Fuck no, I don’t want to waste my time with other shit that doesn’t fulfill me, why on earth would I want to do that?

All this hallucination reduces quality badly. In my experience, it’s also happening much more rapidly than I expected. Even though developers are still supposed to own and understand whatever has been generated under their name and even be responsible for that, the sad reality is that teammates often blindly trust the AI output. “But I asked the AI and it told me that $this was impossible”, “I’ve no idea either, but the AI just generated it” are responses I get more often. What really makes my angry is when I point out a flaw and suggest an alternative and this is the reaction. It happened several times that just trying it out and seeing it clearly work to proof my point only took me half a minute, but people still did something handwavy else instead.

The learning effect is drastically reduced. The more time I spend on a topic, the better the odds that whatever I learned actually makes it over into long-term memory. It’s like if a collegue just says “do it like that” or “this solves your problem”, but neither explains the why or how. Somehow, people are still convinced that it’s a completely different story when you replace the human counterpart with a computer program in this equation.

Skills are unlearned. It’s like with automation in general, just much worse. You end up in a state where you’ve no clue how anything works under the hood or how to actually find out important information that are needed to solve your problem. You’re screwed when a process breaks out of the blue. Even though it can become also rather terrible, with classical automation you’re typically still be able to decipher how exactly the thing was supposed to do something.

The energy consumption is sooo high, I absolutely do not want to be a part in burning down our planet. I’m sure I find (and probably have long found without knowing) other ways to contribute to worsen our climate crisis.

The scraper part is already covered in detail in your list. :-)

I’m convinced that license and copyright violations are only played down or even refused entirely because companies want to make big money quickly. With the work of others of course. Their double standards are obvious, they still try to actively keep their own stuff secret and out of any training sets. At most for internal use only. Virtually noone in charge is interested in good long-term solutions. Short-term for the win, when disaster eventually strikes, the causers are long gone, the responsibilities in other hands.

Vendor lock-in is something that lots of folks are only realizing very slowly. It’s completely crazy to me. This drug dealer routine should be well-known by now. It’s fucking everywhere. Yet, people are always surprised when they found themselves caught in it.

Adding new AI stuff only increases complexity. But complexity is the enemy that everybody should fear and reduce as much as possible. Of course, this is not limited to AI at all. And everywhere I look around, people in charge looooove to make things way more complicated than they ever need to be. Yet, simplicity is the real art and much harder to achieve.

I don’t understand why we have to go back full force to the ambiguity of natural languages. This alone should be more than enough to realize what a stupid idea all that is. Linked to that is that the “instruction set” is interpreted differently with newer model versions. I mean, is has to be. Why else would somebody want to upgrade in the first place than to get more Powerful™ Features™?

Some people argue that with AI the democratization is empowered. However, in my view, the exact opposite is the case. Models are getting so large that you can basically not run them locally or even train them. So, you have to rely on whatever the vendor offers you and runs for you. In the end, this only gives the owners more power, the multi billionaires. Not exactly what I understand by democratization.

Finally, technology assessments are missing completely. Or they are faked such that mostly only the (questionable) benefits are listed. But all the negative impact is just ignored.

Let’s keep some popcorn around for when this all explodes. :-)

@bender@twtxt.net I have no idea. Probably busy with life ya’know 😅 I’m just as guilty myself.

1boy 1girl ai_generated blue_eyes blushing_at_viewer compile_heart cowgirl_position cum_in_pussy female_on_top hair_ornament ideafactory neptunia(series) reedio uncensored vaginal_penetration white_hair white_stockings
1boy 1girl ai_generated blue_eyes blushing_at_viewer compile_heart cowgirl_position cum_in_pussy female_on_top hair_ornament idea_factory neptunia_(series) reedio uncensored vaginal_penetration white_hair white_stockings ⌘ Read more

1boy 1girl ai_generated anal_penetration at_night blue_eyes blush cherry_blossoms compile_heart cum_in_ass female_on_top hair_ornament ideafactory neptunia(series) night_sky partially_clothed reedio showing_pussy uncensored white_hair
1boy 1girl ai_generated anal_penetration at_night blue_eyes blush cherry_blossoms compile_heart cum_in_ass female_on_top hair_ornament idea_factory neptunia_(series) night_sky partially_clothed reedio showing_pussy uncensored white_hair ⌘ Read more

1girl ai_generated blanket blue_eyes blushing_at_viewer breasts compile_heart hair_ornament ideafactory neptunia(series) nude_female reedio spread_legs uncensored white_hair
1girl ai_generated blanket blue_eyes blushing_at_viewer breasts compile_heart hair_ornament idea_factory neptunia_(series) nude_female reedio spread_legs uncensored white_hair ⌘ Read more

1boy 1girl ai_generated black_shoes blue_eyes compile_heart cum_in_pussy hair_ornament ideafactory neptunia(series) on_bed partially_clothed reedio sex uncensored vaginal_penetration white_hair white_stockings worried_expression
1boy 1girl ai_generated black_shoes blue_eyes compile_heart cum_in_pussy hair_ornament idea_factory neptunia_(series) on_bed partially_clothed reedio sex uncensored vaginal_penetration white_hair white_stockings worried_expression ⌘ Read more

Trump’s Federal Gas Tax Holiday Isn’t Likely to Bring Down Prices
Reducing the fee will only have a marginal impact on prices while depriving the government of revenue to maintain roads. ⌘ Read more

NASA plans to launch nuclear-powered Mars mission by end of 2028
An ambitious new mission to the red Planet could demonstrate, for the first time, nuclear electric propulsion in action. The idea of a nuclear-powered… ⌘ Read more

Elon Musk Had ‘Hair-Raising’ Idea of Passing OpenAI Onto His Kids, Sam Altman Says
Musk’s lawyers questioned Altman over allegations of deception and his network of financial investments, but the OpenAI CEO painted a picture of Musk as obsessed with controlling the company. ⌘ Read more

I’m not always on the same page as Rob Pike, but this hit close to home:

Although trained in physics, I worked in the computing industry with pride and purpose for over 40 years. And now I can do nothing but sit back and watch it destroy itself for no valid reason beyond hubris (if I’m being charitable).

Ineffable sadness watching something I once loved deliberately lose its soul.

I spent my time trying to make it better. Not just write code, but find better or at least different ways to do so. Simpler, cleaner, more general, more comprehensible.

What’s happening today is a complete repudiation of everything I was trying to achieve.

“Simpler, cleaner, more general, more comprehensible”, that’s what I’ve been trying to establish in our teams as well. Obviously not to the same degree, but you get the idea.

And it all goes out the window now. We’re doing the complete opposite – and with full force.

@bender@twtxt.net Well I’m open to ideas of course 😅 My goal here was to build something like a Civ-1 inspired game that’s playable online and multiplayer. Do you remember this old bad boy that was played on PC(s) on MS-DOS ?! 😅

@movq@www.uninformativ.de LOL. I think I get the idea. I am concerned about AI too. Managers starting with “I don’t know anything about this, but here is what says”. Infuriating.

I came across this one today, here is a gift link: https://www.nytimes.com/2026/04/15/opinion/art-artificial-intelligence.html?unlocked_article_code=1.bFA.XNiu.ZukFfdNl3Al1&smid=nytcore-ios-share

@lyse@lyse.isobeef.org

Disclaimer: Can’t guarantee that I’m fully awake and I’m being trained at work not to use my brain anymore, so maybe this is complete bullshit. 😪🧟‍♀️

It says here that SQLite uses signed integers:

https://sqlite.org/datatype3.html

In pure bits, 1 << 63 would be 0x8000000000000000, but as a signed value, it gets interpreted as -9223372036854775808. Subtracting 1 yields -9223372036854775809 – but that doesn’t fit in 64 bits anymore. It’s possible that SQLite doesn’t want to wrap around but instead saturates? Haven’t checked. 🤔

With 62 bits, there is enough room.

With 1 << 64, I have no idea how SQLite wants to handle this, because this should immediately trigger a warning, because it doesn’t fit right away. Maybe it gets truncated to 0?

sqlite> select printf('0x%x', 2 * (1 << 64));
╭──────────────────────╮
│ printf('0x%x', 2 ... │
╞══════════════════════╡
│ 0x0                  │
╰──────────────────────╯
sqlite> select printf('0x%x', 0 - 1);
╭──────────────────────╮
│ printf('0x%x', 0 ... │
╞══════════════════════╡
│ 0xffffffffffffffff   │
╰──────────────────────╯
sqlite> select printf('0x%x', 0 - 2);
╭──────────────────────╮
│ printf('0x%x', 0 ... │
╞══════════════════════╡
│ 0xfffffffffffffffe   │
╰──────────────────────╯

This whole thing was pretty weird, btw. I had no idea it was happening until basically yesterday. No news coverage, nobody mentioned it. 🤔 And suddenly, boom, we’re going to the moon. What? 😅

@itsericwoodward@itsericwoodward.com today I learned about “disc golf”. I had no idea that existed. I am assuming the “MRV” is a model/brand for a disc? Any physical activity is good, specially one you enjoy!

Pope meets with delegation of exorcists over acute rise in ‘occultism’
The attendees, who met the Pope at the Vatican, were from the International Association of Exorcists. Whether or not you happen to believe in the idea… ⌘ Read more

Asteroid sample contains all the building blocks of DNA and RNA
Material collected from the asteroid Ryugu has bolstered the idea that the building blocks of life arrived on Earth from space. Part of the Japanese S… ⌘ Read more

Could the infamous Majestic-12 papers have been real all along?
Documents pertaining to a shadowy UFO organization known as Majestic-12 may hold more merit than previously thought. The idea that there could be a cl… ⌘ Read more

@prologic@twtxt.net so…

An isomorphic TypeScript library is a codebase, written in TypeScript, that can run in multiple JavaScript environments, most commonly both the web browser (client-side) and a server (like Node.js). The core idea is to share the exact same code across the frontend and backend, avoiding duplication and improving efficiency.

@bender@twtxt.net Here is a properly formatted version of your message:

Not yet — but that’s probably a good idea.

Instructions:

1. Clone the repository
   

git clone https://git.mills.io/saltyim/saltyim.git
cd saltyim

1. Check out the v2 branch
   

git checkout v2

1. Build and install the CLI/TUI
   

make DESTDIR=$HOME/bin install

After installation, run:

salty-chat

@lyse@lyse.isobeef.org They certainly don’t. 🫤

Had an idea earlier: How about going all in on sustainability and saving money/energy, so how about telling your customers “AI is a bad idea $because_long_list_of_reasons, here are our alternatives, you’ll thank us in 5 years”? (I bet the customers wouldn’t listen either … 🙄)

Real-life ‘RoboCop’ could patrol the streets within 5 years
A sociology and criminal justice professor has predicted that AI and robotics could be the future of law enforcement. The idea of robotic police offic… ⌘ Read more

#py5 #Processing #Python #CreativeCoding

Image

Bizarre conspiracy theory claims Earth’s gravity will stop for 7 seconds
The idea seems to have stemmed from claims of a leaked NASA document known as ‘Project Anchor’. We’ve heard a lot of ‘out there’ conspiracy theories o… ⌘ Read more

So, are you guys up for an experiment?

I’m really not happy with the domain “uninformativ.de” anymore. I’m going to switch to “movq.de” soon (or maybe something else if I get another fancy idea).

If I keep the url = field in my twtxt file, nothing should break, right? Right? 🤣

@prologic@twtxt.net I’d love to take a look at the code. 😅

I’m kind of curious to know how much Assembly I need vs. How much of a microkernel can I build purely in Mu (µ)? 🤔

Can’t really answer that, because I only made a working kernel for 16-bit real mode yet. That is 99% C, though, only syscall entry points are Assembly. (The OpenWatcom compiler provides C wrappers for triggering software interrupts, which makes things easier.)

But in long mode? No idea yet. 😅 At least changing the page tables will require a tiny little bit of Assembly.

Whohoo! 🥳 You have no idea how great a feeling this is! This includes the Mu stdlib and runtime as well, not just some simple stupid program, this means a significant portion of the runtime and stdlib “just works”™ 🤣

Could it be that Source Sans Pro changed recently? No… Somehow at some point ✳ was replaced with ⚹ in my markdown files… I have no idea how this happened.
#Unicode #Typography

Image

@shinyoukai@neko.laidback.moe the whole bridge idea is a mistake done twice (I encouraged the first time, it was a mistake to do so). In this case, the “Babel Tower” works; there is no need to interact with “others”, let it be just twtxt.

I think this is finally a good metaphor to talk about “simple” software:

https://oldbytes.space/@psf/115846939202097661

Distilled software.

I quote in full:

principles of software distillation:

Old software is usually small and new software is usually large. A distilled program can be old or new, but is always small, and is powerful by its choice of ideas, not its implementation size.

A distilled program has the conciseness of an initial version and the refinement of a final version.

A distilled program is a finished work, but remains hackable due to its small size, allowing it to serve as the starting point for new works.

Many people write programs, but few stick with a program long enough to distill it.

I often tried to tell people about “simple” or “minimalistic” software, “KISS”, stuff like that, but they never understand – because everybody has a different idea of “simple”. The term “simple” is too abstract.

This is worth thinking about some more. 🤔

At around 19 seconds in the video, you can see some minor graphical glitches.

Text mode applications in Unix terminals are such a mess. It’s a miracle that this works at all.

In the old DOS days, you could get text (and colors) on the screen just by writing to memory, because the VGA memory was mapped to a fixed address. We don’t have that model anymore. To write a character to a certain position, you have to send an escape sequence to move the cursor to that position, then more escape sequences to set the color/attributes, then more escape sequences to get the cursor to where you actually want it. And then of course UTF-8 on top, i.e. you have no idea what the terminal will actually do when you send it a “🙂”.

Mouse events work by the terminal sending escape sequences to you (https://www.xfree86.org/current/ctlseqs.html#Mouse%20Tracking).

ncurses does an amazing job here. It’s fast (by having off-screen buffers and tracking changes, so it rarely has to actually send full screen updates to the terminal) and reliable and works across terminals. Without the terminfo database that keeps track of which terminal supports/requires which escape sequences, we’d be lost.

But gosh, what a mess this is under the hood … Makes you really miss memory mapped VGA and mouse drivers.

Btw, @shinyoukai@neko.laidback.moe, that’s a super cool logo on your yarnd. I like it a lot!

It just doesn’t look aligned properly:

Image

@lyse@lyse.isobeef.org I’m toying with the idea of making a widget/window system on top of Python’s ncurses. I’ve never really been happy with the existing ones (like urwid, textual, pytermgui, …). I mean, they’re not horrible, it’s mostly the performance that’s bugging me – I don’t want to wait an entire second for a terminal program to start up.

Not sure if I’ll actually see it through, though. Unicode makes this kind of thing extremely hard. 🫤

Astronomer: first aliens we encounter may be on the verge of collapse
One scientist has put forward the idea that any alien civilizations we encounter may be nearing their own end. When we consider the possibilities of c… ⌘ Read more

Wow, @movq@www.uninformativ.de, so many tables. No idea what I expected (I’m totally clueless on this low-level stuff), but that was quite an interesting surprise to me. https://www.uninformativ.de/blog/postings/2025-12-21/0/POSTING-en.html

@movq@www.uninformativ.de Oh, a table of contents is indeed a great idea!

I’m seeing crashes in the 3D subsystem. (Gallium? Glamor? Whatever other Mesa thing they have? No idea.) In the logs I find this:

malloc(): unaligned tcache chunk detected

And that’s why I still care about Rust and want to learn more about it, even though it’s giving me so much headache and I’ve given up so many times. Because Rust currently seems to be the only popular systems programming language that tries to eliminate these error classes.

And of course “the Rust experiment” in the Linux kernel has recently been concluded as “successful”, so that alone is reason enough for me:

https://lwn.net/Articles/1049831/

@lyse@lyse.isobeef.org Yeah, no idea why that is. 🤔

I meant were. You get the idea.

Also, I just realized that simple links like that turn into inline images on twtxt.net. Nice! 🥳

I’m contemplating the idea of switching my activity pub instance from Gootosocial to a Pleroma one. While GTS is kinda cute (lightweight and easy to manage) of a software, the inability to fetch/scroll through people’s past toots when visiting a profile or having access to a federated timeline and a proper search functionality …etc felt like handicap for the past N months.

Advent of Code 2025 starts tomorrow. 🥳🎄

This year, I’m going to use Python 1 on SuSE Linux 6.4, writing the code on my trusty old Pentium 133 with its 64 MB of RAM. No idea if that old version of Python will be fast enough for later puzzles. We’ll see.

Image

@kiwu@twtxt.net I’ve no idea about regulations in your area, but over here there are different taxation rules for video and photo cameras. Hence, manufacturers limit the video recording time of photo cameras typically to half an hour, so that they don’t classify as video cameras with their higher taxes.

Oh fuck me! I had basically turned off the route to git.mills.io last night and went ot bed at ~2AM after unsuccessfully trying to control the attacks (bad bots) that were behaving like a DDoS attack. Tried to re-enable the route this monring and *BOOM, they’re back! As-if they never stopped?! what da actual fuq?! Anyone have any clever ideas of what I can do here to allows normal users, like you nice folk and block ths obnoxious traffic?!

The last few days I’ve been converting some charts to grayscale and adding letters to them in order to improve accessibility. Inskscape’s “Replace Colour” extension made things much easier.

I wonder if I could one day try my hand at making an improved variation of that extension that could save and reload a dictionary of replacements to help apply them to multiple files…
Another idea would be to allow replacement color fills with patterns and vice versa!

Let me save this on vault of ideas for the future :)

#a11y #Inkscape #FLOSS

I just noticed this pattern:

uninformativ.de 201.218.xxx.xxx - - [22/Nov/2025:06:53:27 +0100] "GET /projects/lariza/multipass/xiate/padme/gophcatch HTTP/1.1" 301 0 "" "Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/112.0.0.0 Safari/537.36"
www.uninformativ.de 103.10.xxx.xxx  - - [22/Nov/2025:06:53:28 +0100] "GET http://uninformativ.de/projects/lariza/multipass/xiate/padme/gophcatch HTTP/1.1" 400 0 "" "Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/112.0.0.0 Safari/537.36"

Let me add some spaces to make it more clear:

    uninformativ.de 201.218.xxx.xxx - - [22/Nov/2025:06:53:27 +0100] "GET                       /projects/lariza/multipass/xiate/padme/gophcatch HTTP/1.1" 301 0 "" "Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/112.0.0.0 Safari/537.36"
www.uninformativ.de 103.10.xxx.xxx  - - [22/Nov/2025:06:53:28 +0100] "GET http://uninformativ.de/projects/lariza/multipass/xiate/padme/gophcatch HTTP/1.1" 400 0 "" "Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/112.0.0.0 Safari/537.36"

Some IP (from Brazil) requests some (non-existing, completely broken) URL from my webserver. But they use the hostname uninformativ.de, so they get redirected to www.uninformativ.de.

In the next step, just a second later, some other IP (from Nepal) issues an HTTP proxy request for the same URL.

Clearly, someone has no idea how HTTP redirects work. And clearly, they’re running their broken code on some kind of botnet all over the world.

I was looking at some ancient code and then thought: Hmm, maybe it would be a good idea to see more details in this error message. Which of the values don’t line up. On the other hand, that feature isn’t probably used anyway, because it’s a bit ugly to use (historically evolved). And on top of that, most teams need something slightly different, if they deal with that sort of thing.

I still told my workmates about it, so they could also have a look at it and we can decide tomorrow what to do about it. Speaking of the devil, no kidding, not even half an hour later, a puzzled tester contacted me. She received exactly that rather useless error message. Looks like I had an afflatus. ;-)

It’s interesting, though, that in all those years, nobody stumbled across this before. At least we now know for sure that this is not dead code. :-)

@prologic@twtxt.net FWIW, I love the idea and I do the same with my email domains. It’s the most effective way to fight spam, IMO. 🥳

@prologic@twtxt.net Let’s go through it one by one. Here’s a wall of text that took me over 1.5 hours to write.

This section says AI should not be treated as an authority. This is actually just what I said, except the AI phrased/framed it like it was a counter-argument.

The AI also said that users must develop “AI literacy”, again phrasing/framing it like a counter-argument. Well, that is also just what I said. I said you should treat AI output like a random blog and you should verify the sources, yadda yadda. That is “AI literacy”, isn’t it?

My text went one step further, though: I said that when you take this requirement of “AI literacy” into account, you basically end up with a fancy search engine, with extra overhead that costs time. The AI missed/ignored this in its reply.

Okay, so, the AI also said that you should use AI tools just for drafting and brainstorming. Granted, a very rough draft of something will probably be doable. But then you have to diligently verify every little detail of this draft – okay, fine, a draft is a draft, it’s fine if it contains errors. The thing is, though, that you really must do this verification. And I claim that many people will not do it, because AI outputs look sooooo convincing, they don’t feel like a draft that needs editing.

Can you, as an expert, still use an AI draft as a basis/foundation? Yeah, probably. But here’s the kicker: You did not create that draft. You were not involved in the “thought process” behind it. When you, a human being, make a draft, you often think something like: “Okay, I want to draw a picture of a landscape and there’s going to be a little house, but for now, I’ll just put in a rough sketch of the house and add the details later.” You are aware of what you left out. When the AI did the draft, you are not aware of what’s missing – even more so when every AI output already looks like a final product. For me, personally, this makes it much harder and slower to verify such a draft, and I mentioned this in my text.

You, @prologic@twtxt.net, also mentioned this in your car tyre example.

In my text, I gave two analogies: The gym analogy and the Google Translate analogy. Your car tyre example falls in the same category, but Gemini’s calculator example is different (and, again, gaslight-y, see below).

What I meant in my text: A person wants to be a programmer. To me, a programmer is a person who writes code, understands code, maintains code, writes documentation, and so on. In your example, a person who changes a car tyre would be a mechanic. Now, if you use AI to write the code and documentation for you, are you still a programmer? If you have no understanding of said code, are you a programmer? A person who does not know how to change a car tyre, is that still a mechanic?

No, you’re something else. You should not be hired as a programmer or a mechanic.

Yes, that is “skill evolution” – which is pretty much my point! But the AI framed it like a counter-argument. It didn’t understand my text.

(But what if that’s our future? What if all programming will look like that in some years? I claim: It’s not possible. If you don’t know how to program, then you don’t know how to read/understand code written by an AI. You are something else, but you’re not a programmer. It might be valid to be something else – but that wasn’t my point, my point was that you’re not a bloody programmer.)

Gemini’s calculator example is garbage, I think. Crunching numbers and doing mathematics (i.e., “complex problem-solving”) are two different things. Just because you now have a calculator, doesn’t mean it’ll free you up to do mathematical proofs or whatever.

What would have worked is this: Let’s say you’re an accountant and you sum up spendings. Without a calculator, this takes a lot of time and is error prone. But when you have one, you can work faster. But once again, there’s a little gaslight-y detail: A calculator is correct. Yes, it could have “bugs” (hello Intel FDIV), but its design actually properly calculates numbers. AI, on the other hand, does not understand a thing (our current AI, that is), it’s just a statistical model. So, this modified example (“accountant with a calculator”) would actually have to be phrased like this: Suppose there’s an accountant and you give her a magic box that spits out the correct result in, what, I don’t know, 70-90% of the time. The accountant couldn’t rely on this box now, could she? She’d either have to double-check everything or accept possibly wrong results. And that is how I feel like when I work with AI tools.

Gemini has no idea that its calculator example doesn’t make sense. It just spits out some generic “argument” that it picked up on some website.

The AI makes two points here. The first one, I might actually agree with (“bad bot behavior is not the fault of AI itself”).

The second point is, once again, gaslighting, because it is phrased/framed like a counter-argument. It implies that I said something which I didn’t. Like the AI, I said that you would have to adjust the copyright law! At the same time, the AI answer didn’t even question whether it’s okay to break the current law or not. It just said “lol yeah, change the laws”. (I wonder in what way the laws would have to be changed in the AI’s “opinion”, because some of these changes could kill some business opportunities – or the laws would have to have special AI clauses that only benefit the AI techbros. But I digress, that wasn’t part of Gemini’s answer.)

Except for one point, I don’t accept any of Gemini’s “criticism”. It didn’t pick up on lots of details, ignored arguments, and I can just instinctively tell that this thing does not understand anything it wrote (which is correct, it’s just a statistical model).

And it framed everything like a counter-argument, while actually repeating what I said. That’s gaslighting: When Alice says “the sky is blue” and Bob replies with “why do you say the sky is purple?!”

But it sure looks convincing, doesn’t it?

This took so much of my time. I won’t do this again. 😂

@kiwu@twtxt.net hey, not random! How dare you! (with Greta accent, and emphasis). LOL. Old man here doing, well, like old man do. Wait until you are old, and that will give you a better idea. :-P