Turing Pi 2.5 4-Node Mini-ITX Cluster Board Receives Hardware Upgrades
The Turing Pi 2.5 is an updated version of the Turing Pi 2.0, a 4-node mini ITX cluster board compatible with Raspberry Pi CM4 modules and Nvidia Jetson modules. This compact device is designed for applications such as building Homelabs, self-hosting, and machine learning tasks, as it is capable of continuous 24/7 operation. The Turing

⤋ Read More
In-reply-to » (#mfqbohq) There is, also, a small controversy going around for something that should have been a small change, but that Kling (SerenityOS, and Ladybird creator) handled quite badly: https://github.com/SerenityOS/serenity/pull/6814.

Yeah, though sometimes the most clever devs aren’t always the best to deal with on a personal level. I seem to remember the (former?) lead dev on GrapheneOS (IIRC) was an ass hat and threw tantrums at the smallest things and would get stalkery and weird if someone criticised him, but he’s undeniably a brilliant coder and problem solver. Some people need to be more self aware of how their efforts might be harmed with their behaviour though.

⤋ Read More

Quick life hack regarding dead gopherholes: Try to contact the owner. Sometimes there is a httpd listening on the same host which points at a way to contact the owner. So

⤋ Read More
In-reply-to » I don't remember who was looking for a way to block A.I bots/scrappers. But here's an article by Cloudflare "Declare your AIndependence: block AI bots, scrapers and crawlers with a single click" offering a way to do so even for the ones spoofing their User-Agent and such.

So basically it seems that Cloudflare has enough data that they can do machine learning to figure out whether the traffic behavior and patterns of bots even ones that fake their identity are really bots or not right?

⤋ Read More
In-reply-to » (#ze7cu6q) @prologic have you seeing this? https://www.sjoerdlangkemper.nl/2024/06/26/htmx-content-security-policy/

@bender@twtxt.net No but reading a bit of that post:

Because dynamic behavior is added to the page using normal HTML tags with custom attributes, it is difficult to provide additional security against cross-site scripting (XSS) attacks.

Is complete bullshit. It’s like one line of code (if you can call HTML “code”)

⤋ Read More

ADLINK Unveils NXP i.MX 93 and i.MX 8M Plus Based Open Standard Modules
ADLINK introduced two new modules this week, the NXP i.MX 93 and NXP i.MX 8M Plus, designed for industrial and IoT applications requiring high efficiency and performance. These modules are integrated into an ultra-compact form factor to meet diverse application needs. The core of the OSM-iMX93 module is powered by the NXP i.MX93 processor, featuring

⤋ Read More

(Updated) SkyByte: An Upcoming Mini DIY Drone Powered by ESP32 MCU with Smartphone Control
SkyByte: An Upcoming Mini DIY Drone Powered by ESP32 MCU with Smartphone Control
The SkyByte, an upcoming Mini DIY Wi-Fi Drone powered by the versatile ESP32 microcontroller, is set to debut on Kickstarter soon. This compact, open-source drone is engineered to attract both tech enthusiasts and beginners, featuring control via a smartphone app. ⌘ Read more

⤋ Read More
In-reply-to » Another minor inconvenience could have been avoided by reading the Arch Linux news feed before upgrading.

@mckinley@twtxt.net I must admit I was tempted to use EndeavourOS for an install on a HTPC (N97 mini PC) when it arrives to quickly get up and running, but then again I haven’t done a fresh install of Arch in quite a while so it sounds like things have simplified even more since then. Hmm…

⤋ Read More
In-reply-to » Another minor inconvenience could have been avoided by reading the Arch Linux news feed before upgrading.

One more point, not necessarily for @bender@twtxt.net but for anyone else reading this. If you don’t want to use the command line, Arch probably isn’t for you. Linux Mint is much closer to a command-line-free distribution. Don’t be afraid of the command line, though. The command line is good for you.

⤋ Read More
In-reply-to » Another minor inconvenience could have been avoided by reading the Arch Linux news feed before upgrading.

@bender@twtxt.net Yes, that one. It’s not a big deal unless you use Arch on a remote machine. You can expect some minor issues like this, but the Arch team does a good job of smoothing these things over with prompt updates and announcements like that if they can’t.

EndeavourOS is alright, better than Manjaro in my opinion. If you’re going to use an Arch based distribution, I would recommend just installing regular Arch. They have an install script now that makes the installation very easy if you want an average setup, but the manual installation isn’t that hard if you want something more specialized.

The Arch manual installation also gives you valuable knowledge on how to fix the system if it breaks.

⤋ Read More

(Updated) T-Display S3 Pro adds a 2.33” screen and phone OTG support
LILYGO has introduced the T-Display S3 Pro, a solution designed for portable applications that require multi-touch display support. This compact device not only boasts a 400mA battery but also integrates a range of sensors and offers optional IMU support. Similarly as the standard T-Display-S3 released some time ago, this upgraded version accommodates the following ESP32-S3

⤋ Read More
In-reply-to » (#ch5vxqq) @prologic Looks like any other payment service except it's intermingled with some sketchy cryptocurrency. I would just bypass all that and use Monero instead.

@prologic@twtxt.net Regardless, Sentz looks really sketchy to me and I wouldn’t trust it at all. I think it would probably function properly; they probably aren’t going to outright steal your money (for now), but I have reservations about the confidentiality of transactions and what might happen to the ecosystem in the long-term.

Any “cryptocurrency” created by a for-profit company cannot be trusted. Plus, I’m not seeing a link to any source code from the home page either.

⤋ Read More

Swift on RISC-V: Launch of New Toolchain for RISC-V Hardware
The Swift programming community has taken a significant step towards embracing open architecture with the announcement of the first Swift toolchain release for RISC-V hardware. This new project, Swift on RISC-V, introduces a complete toolchain that can be installed and used on RISC-V platforms, including the VisionFive 2 single-board computer. As RISC-V’s open-source instruction set

⤋ Read More

Affordable RISC-V Development Board Built Around 32-bit QingKe CH32V003 Processor
Tindie recently featured a development kit designed to evaluate and leverage the capabilities of the low-cost CH32V003 microcontroller. Key features include multiple GPIOs, support for various communication protocols, a small OLED interactive display, and tutorials to help users learn to interface with the product. The CH32V003 is a 32-bit MCU based on the RISC-V 2A

⤋ Read More
In-reply-to » How have I missed Linux’s landlock? 🤔 Maybe we’ll get something like OpenBSD’s pledge/unveil some day. For now, landlock appears to be more complicated, but we’ll see how it goes. Gotta play with this some time. 🤔

@movq@www.uninformativ.de Don’t we already have containers though? Linux cgroups alert find toy a level of isolation that is already pretty starting?

⤋ Read More
In-reply-to » Another day, another web app built 😅 This time tubeproxy, which still needs some tidying up project-wise (bugger all docs, setup guide, etc), but so far it works quite nicely. If you're curious, you're welcome to try it out at https://tubeproxy.mills.io -- Although technically this meant for internal use (as I block Youtube at the network on purpose).

@darren@twtxt.net Thanks! 🙏

⤋ Read More
In-reply-to » Another day, another web app built 😅 This time tubeproxy, which still needs some tidying up project-wise (bugger all docs, setup guide, etc), but so far it works quite nicely. If you're curious, you're welcome to try it out at https://tubeproxy.mills.io -- Although technically this meant for internal use (as I block Youtube at the network on purpose).

@prologic@twtxt.net Nice!

⤋ Read More
In-reply-to » Can anyone recommend and/or vouch for a Chrome/browser extension that lets me write rewrite rules for arbitrary links on a page? e.g: s/(www\.)?youtube.com\/watch?v=([^?]+)/tubeproxy.mills.io/play/\1 for example? 🤔

@prologic@twtxt.net I use Redirector by Einar Egilsson. It works great. You can even import and export your rules with JSON files.

⤋ Read More
In-reply-to » Can anyone recommend and/or vouch for a Chrome/browser extension that lets me write rewrite rules for arbitrary links on a page? e.g: s/(www\.)?youtube.com\/watch?v=([^?]+)/tubeproxy.mills.io/play/\1 for example? 🤔

Have not tried any of them, but some of these seem to fit the bill:

⤋ Read More

Synaptics Astra AI-Native IoT Platform with SL-Series Embedded Processors Now Available For Ordering
The Synaptics Astra platform introduces the SL-Series of AI-native IoT processors, utilizing Arm Cortex A-series CPUs. These SoCs are tailored for the IoT commercial market, featuring hardware accelerators for edge inferencing and multimedia processing in audio, video, and speech. The Synaptics SL1680 delivers robust performance with a quad-cor … ⌘ Read more

⤋ Read More

Can anyone recommend and/or vouch for a Chrome/browser extension that lets me write rewrite rules for arbitrary links on a page? e.g: s/(www\.)?youtube.com\/watch?v=([^?]+)/tubeproxy.mills.io/play/\1 for example? 🤔

⤋ Read More

Another day, another web app built 😅 This time tubeproxy, which still needs some tidying up project-wise (bugger all docs, setup guide, etc), but so far it works quite nicely. If you’re curious, you’re welcome to try it out at https://tubeproxy.mills.io – Although technically this meant for internal use (as I block Youtube at the network on purpose).

Additional features I’m thinking about next:

  • Add to Plex (on-demand download, tag and update of the Plex archives)
  • Subscribe (added to my ytdl-sub that subscribes to Youtube channels and stores nicely in Plex)

⤋ Read More
In-reply-to » If you're reading this, it is now possible to post on twtxt.net using Ladybird!

@eldersnake@we.loveprivacy.club A huge effort. Andreas Kling is the lead of the SerenityOS project and he makes great videos on his YouTube channel. It’s mostly been monthly updates lately on SerenityOS and Ladybird but he also has a lot of programming videos where you get to see his process, fixing a bug or adding a feature from start to finish. I highly recommend his channel.

⤋ Read More