@lyse@lyse.isobeef.org only four squalid clicks, oh my 😅! Is #02 frozen water? Can’t tell well, but looks like.

Oh wow, the boxes are ticked now! When I first checked, they were still showing like the screenshot. Well done! 🥳

** trees; week notes **

Image

A photo in lieu of week notes. ⌘ Read more

When people “make plans”, I always respond like this:

https://movq.de/v/9a8712846d/at-night.jpg

Finally found the clip where this is from:

https://www.youtube.com/watch?v=VfDty810Kfc&t=65s

Spent basically the entire day (except for the mandatory walk) fighting with Python’s type hints. But, the result is that my widget toolkit now passes mypy --strict.

I really, really don’t want to write larger pieces of software without static typing anymore. With dynamic typing, you must test every code path in your program to catch even the most basic errors. pylint helps a bit (doesn’t need type hints), but that’s really not enough.

Also, somewhere along the way, I picked up a very bad (Python) programming style. (Actually, I know exactly where I picked that up, but I don’t want to point the finger now.) This style makes heavy use of dicts and tuples instead of proper classes. That works for small scripts, but it very quickly turns into an absolute mess once the program grows. Prime example: jenny. 😩

I have a love-hate relationship with Python’s type hints, because they are meaningless at runtime, so they can be utterly misleading. I’m beginning to like them as an additional safety-net, though.

(But really, if correctness is the goal, you either need to invest a ton of time to get 100% test coverage – or don’t use Python.)

@movq@www.uninformativ.de Hehe. :-) This steep footpath connects a hiking parking lot outside the village and the edge of the village in a fairly straight line. Garden owners are allowed to drive their vehicles down from the village to their lots on this pathway and up again. These two poles are placed about a third up from the botton on a short, comparatively flat section to stop people from taking this shortcut to get down to the country road. Said road goes through the village but there are hairpins getting up and down. The road markings have been added recentlyish. I suspect to warn shooting down cyclists of the danger ahead. I haven’t seen something like this anywhere else either. :-)

@lyse@lyse.isobeef.org All that short brown grass, almost looks like Scotland. 🤔 (I’ve never been there. 😅)

What the heck is 06.jpg?

My mate and I went on a hike earlier. Yesterday, we had lovely 12°C. But today, it was down to at most 4°C. Oh well. At least the sun was out and and there was just a tiny bit of wind. We knew upfont that scarf, beanie and gloves were mandatory. Especially at the more windy sections like up top the hills. The view was absolutely terrible, but we made the best of it.

With the sun shining on us during our lunch break at a forest edge bench, we still enjoyed the lookout in 01. I brought some old carpet scraps to sit on and was happily surprised that they isolated even better than I had hoped for. Some hot tea helped us staying warm.

After five hours we returned just after sunset. I’m quite tired now, completely out of shape.

https://lyse.isobeef.org/waldspaziergang-2026-01-17/

@lyse@lyse.isobeef.org (At least I didn’t break all the links again. In late 2015, I switched from a PHP backend to the current static website, which changed just about everything. I hope doing a disruptive change like this one every 10 years is tolerable. 😅)

@bender@twtxt.net I’m already using it for tracktivity (meant for tracking activities and events, like weather, food consumption, stuff like that), which is basically a somewhat-fancy CSV editor:

https://movq.de/v/f26eb836ee/s.png

I have a couple of other projects where I could use it, because they are plain curses at the moment. Like, one of them has an “edit box”, but you can’t enter Unicode, because it was too complicated. That would benefit from the framework.

Either way, it’s the most satisfying project in a long time and I’m learning a ton of stuff.

@bender@twtxt.net ICQ, yeah, I vaguely remember these times, despite I still know my ICQ number like it was yesterday. :-D

@shinyoukai@neko.laidback.moe No, it’s not dead. The one account in question actually is on jabber.org.

Yes, if a twtxt contains something like “(This is a test. Will this work as it should?)”, it will show empty on Yarn.

@klaxzy@klaxzy.net nothing like a blank twt eh? 😅

I’m trying to implement configurable key bindings in tt. Boy, is parsing the key names into tcell.EventKeys a horrible thing. This type consists of three information:

1. maybe a predefined compound key sequence, like Ctrl+A
   
2. maybe some modifiers, such as Shift, Ctrl, etc.
   
3. maybe a rune if neither modifiers are present nor a predefined compound key exists
   

It’s hardcoded usage results in code like this:

func (t *TreeView[T]) InputHandler() func(event *tcell.EventKey, setFocus func(p tview.Primitive)) {
    return t.WrapInputHandler(func(event *tcell.EventKey, setFocus func(p tview.Primitive)) {
        switch event.Key() {
        case tcell.KeyUp:
            t.moveUp()
        case tcell.KeyDown:
            t.moveDown()
        case tcell.KeyHome:
            t.moveTop()
        case tcell.KeyEnd:
            t.moveBottom()
        case tcell.KeyCtrlE:
            t.moveScrollOffsetDown()
        case tcell.KeyCtrlY:
            t.moveScrollOffsetUp()
        case tcell.KeyTab, tcell.KeyBacktab:
            if t.finished != nil {
                t.finished(event.Key())
            }
        case tcell.KeyRune:
            if event.Modifiers() == tcell.ModNone {
                switch event.Rune() {
                case 'k':
                    t.moveUp()
                case 'j':
                    t.moveDown()
                case 'g':
                    t.moveTop()
                case 'G':
                    t.moveBottom()
                }
            }
        }
    })
}

This data structure is just awful to handle and especially initialize in my opinion. Some compound tcell.Keys are mapped to human-readable names in tcell.KeyNames. However, these names always use - to join modifiers, e.g. resulting in Ctrl-A, whereas tcell.EventKey.Name() produces +-delimited strings, e.g. Ctrl+A. Gnaarf, why this asymmetry!? O_o

I just checked k9s and they’re extending tcell.KeyNames with their own tcell.Key definitions like crazy: https://github.com/derailed/k9s/blob/master/internal/ui/key.go Then, they convert an original tcell.EventKey to tcell.Key: https://github.com/derailed/k9s/blob/b53f3091ca2d9ab963913b0d5e59376aea3f3e51/internal/ui/app.go#L287 This must be used when actually handling keyboard input: https://github.com/derailed/k9s/blob/e55083ba271eed6fc4014674890f70c5ed6c70e0/internal/ui/tree.go#L101

This seems to be much nicer to use. However, I fear this will break eventually. And it’s more fragile in general, because it’s rather easy to forget the conversion or one can get confused whether a certain key at hand is now an original tcell.Key coming from the library or an “extended” one.

I will see if I can find some other programs that provide configurable tcell key bindings.

@movq@www.uninformativ.de @prologic@twtxt.net That’s what I like about Go, too. However, every now and then I really dislike the result, e.g. when removing spaces from a column layout. Doesn’t happen often, but when it does, I hate it.

I think I should have a look at Python formatters, too. Pep8 is deprecated, I think, it’s been some time that I looked at it.

@lyse@lyse.isobeef.org It’s not super comfortable, that’s right.

But these mouse events come with a caveat anyway:

ncurses uses the XM terminfo entry to enable mouse events, but it looks like this entry does not enable motion events for most terminal emulators. Reporting motion events is supported by, say, XTerm, xiate, st, or urxvt, it just isn’t activated by XM. This makes all this dragging stuff useless.

For the moment, I edited the terminfo entry for my terminal to include motion events. That can’t be a proper solution. I’m not sure yet if I’m supposed to send the appropriate sequence manually …

And the terminfo entries for tmux or screen don’t include XM at all. tmux itself supports the mouse, but I’m not sure yet how to make it pass on the events to the programs running inside of it (maybe that’s just not supported).

To make things worse, on the Linux VT (outside of X11 or Wayland), the whole thing works differently: You have to use good old gpm to get mouse events (gpm has been around forever, I already used this on SuSE Linux). ncurses does support this, but this is a build flag and Arch Linux doesn’t set this flag. So, at the moment, I’m running a custom build of ncurses as a quick hack. 😅 And this doesn’t report motion events either! Just clicks. (I don’t know if gpm itself can report motion events, I never used the library directly.)

tl;dr: The whole thing will probably be “keyboard first” and then the mouse stuff is a gimmick on top. As much as I’d like to, this isn’t going to be like TUI applications on DOS. I’ll use “Windows” for popups or a multi-window view (with the “WindowManager” being a tiny little tiling WM).

** no beautiful things **
There’s this line in The Hobbit that haunts me. For one thing, it is part of a wider problematic habit running throughout all of Tolkien that, moving in the mythopoetic space, leads to these sweeping statements that define or collapse an entire culture into a single stroke. It seems to me to be like the most damning thing you could say about a culture, though:

Now goblins are cruel, wicked, and bad-hearted. They make no beautiful things, but they make many clever ones.

Emphasis my own, and the quote … ⌘ Read more

@movq@www.uninformativ.de Oh, I see. Unfortunately, there seems to be no box drawing character for a corner with a diagonal line. Indeed, this is probably the best you can do.

Is the single character enough to hit it comfortably with the mouse, though? Maybe one additional to the left and above could be something to think about. Not sure. Of course this complicates it a bit more. Personally, I like fullscreen windows, so I’m definitely the wrong guy to judge this or even comment on. :-)

(The background and the window shadow are not amber and it wouldn’t have looked like that on a real monitor, unless you cranked up the brightness way too high.)

Vacation: Doing crazy things like C on DOS, lots of Rust, bare-metal assembly code, everything is fine.

Back at work: How the fuck do I move an email in this web mail program? Am I stupid? 😮‍💨

@prologic@twtxt.net Yep! I like that this distillation metaphor makes it explicit: You have to go ahead and actually distill something. It doesn’t happen automatically. The metaphor acknowledges that this is work that needs to be done by someone.

@bender@twtxt.net They’re not completely impossible, but C makes it much easier to run into them. I think the key point is that in those “safe” languages, buffer overflows are caught and immediately crash the program (if not handled otherwise) instead of silently corrupting memory, not being noticed right away and maybe only later crashing at a different location, where it can be very hard to find the actual root cause. This is a big improvement in my book.

Some programmers are indeed horrible. I’m guilty myself. :-)

I like the article.

I came across this on “Why Is SQLite Coded In C”, which I found interesting:

“There has lately been a lot of interest in “safe” programming languages like Rust or Go in which it is impossible, or is at least difficult, to make common programming errors like memory leaks or array overruns.”

If that’s true, then encountering those issues means the programmer is, simply, horrible?

@movq@www.uninformativ.de I quite like this part:

Many people write programs, but few stick with a program long enough to distill it.

I think this is finally a good metaphor to talk about “simple” software:

https://oldbytes.space/@psf/115846939202097661

Distilled software.

I quote in full:

principles of software distillation:

Old software is usually small and new software is usually large. A distilled program can be old or new, but is always small, and is powerful by its choice of ideas, not its implementation size.

A distilled program has the conciseness of an initial version and the refinement of a final version.

A distilled program is a finished work, but remains hackable due to its small size, allowing it to serve as the starting point for new works.

Many people write programs, but few stick with a program long enough to distill it.

I often tried to tell people about “simple” or “minimalistic” software, “KISS”, stuff like that, but they never understand – because everybody has a different idea of “simple”. The term “simple” is too abstract.

This is worth thinking about some more. 🤔

@movq@www.uninformativ.de Yiha! Even autoscroll, very nice! The naming certainly drew inspiration from Urwid. I like it. Looking forward to eventually checking out its inner workings. :-)

Looks like someone loves Depth First Search.

https://movq.de/v/eece1bf16f/dfs.jpg

More widget system progress:

https://movq.de/v/87e2bce376/vid-1767467193.mp4

I like the oldschool shadow effect. 😅 Not sure if I’ll keep it, but it’s neat.

The menu bar is still fake.

Had to spend quite a bit of time optimizing the rendering today. This can get really slow really quickly.

Unicode is Pain.

I might be able to start porting my first program (currently uses urwid) soon. 🤔

@lyse@lyse.isobeef.org Bah. Yeah, that looks like a bug. Let’s see if this already reported upstream. 🤔

** 2026.01 week notes **
Will I succeed in making week notes a weekly activity this year?

Only time will tell!

…also, I mean…I feel like the answer is already“no” and that is fine, but anyways.

• I don’t usually take the holidays off from work, it is a nice time to catch up on stuff while still being able to hang out with my family who are all off from school and work.
  
• I’ve moved where I work in the house so that it is easier for me to hang out with the dog who’s struggling to go up and down stairs, which is kinda problematic since … ⌘ Read more

On my way to having windows and mouse support:

https://movq.de/v/95bbbbd3e8/basic-windows.mp4

It would be cool to have something like Turbo Vision eventually.

(I considered just using Turbo Vision, but it’s a C++ library and that’s not quite what I’m looking for. But it’s not yet completely off the table.)

I keep thinking about this piece on students that have not learned yet about folder/directory structures…

https://archive.ph/GV2vX

I have met many students like that, I wonder if I could help them get it better, or if I shouldn’t worry about it at all.

I keep thinking about this piece on students that have not learned yet about folder/directory structures…

https://archive.ph/GV2vX

I have met many students like that, I wonder if I could help them get it better, or if I shouldn’t worry about it at all (they’ll mostly get used to it without much help).

#ComputingEducation #teachig

The only good thing about this absolute craziness is that I can restock my rocket sticks. I picked up twelve along the way. Unfortunately, it looks like 99.999% of ammunition is bombs instead of rockets. Some sections of my street look exactly like an arbitrary Pakistanian town that I’ve seen online.

There was surprisingly much snow in the woods. Also, all ponds have frozen over. I didn’t expect that. Not at all. There were even illegal ice skating tracks in the natural reserve. We came across a large puddle and it was at least 10cm solid ice to the ground. Crazy!

https://lyse.isobeef.org/waldspaziergang-2026-01-01/

@movq@www.uninformativ.de This is fuck’n great shit™ Where did you find this? 🤔 Got any more shit™ like this? 🙏

@movq@www.uninformativ.de Well, just a very limited subset thereof:

1. inline and multiline code blocks using single/double/triple backticks (but no code blocks with just indentation)
   
2. markdown links using using [text](url)
   
3. markdown media links using ![alt](url)
   

And that’s it. No bold, italics, lists, quotes, headlines, etc.

Just like mentions, plain URLs, markdown links and markdown media URLs are highlighted and available in the URLs View. They’re also colored differently, similarly to code segments.

I definitely should write some documentation and provide screenshots.

It totally sounds like an active warzone around here. So, I just went on a very, very, very quick stroll to check out our sunset from ontop our hill (were all the bangs are way more horrible): https://lyse.isobeef.org/abendhimmel-2025-12-31/

@movq@www.uninformativ.de That’s cool! I also like the name of your library. :-) I assume you made the thing load quickly, didn’t you?

Well, you girls and guys are making cool things, and I have some progress to show as well. 😅

https://movq.de/v/c0408a80b1/movwin.mp4

Scrolling widgets appears to work now. This is (mostly) Unicode-aware: Note how emojis like “😅” are double-width “characters” and the widget system knows this. It doesn’t try to place a “😅” in a location where there’s only one cell available.

Same goes for that weird “ä” thingie, which is actually “a” followed by U+0308 (a combining diacritic). Python itself thinks of this as two “characters”, but they only occupy one cell on the screen. (Assuming your terminal supports this …)

This library does the heavy Unicode lifting: https://github.com/jquast/wcwidth (Take a look at its implementation to learn how horrible Unicode and human languages are.)

The program itself looks like this, it’s a proper widget hierarchy:

https://movq.de/v/1d155106e2/s.png

(There is no input handling yet, hence some things are hardwired for the moment.)

I just fixed another bug in tt where the language hint in multiline markdown code blocks had not been stripped before rendering. It just looked like it was part of the actual code, which was ugly. I now throw it away. Actually, it’s already extracted into the data model for possible future syntax highlighting.

Btw, @shinyoukai@neko.laidback.moe, that’s a super cool logo on your yarnd. I like it a lot!

It just doesn’t look aligned properly: https://lyse.isobeef.org/tmp/misalignment.png Could be a yarnd issue, though, it might not expect a logo this large. Just wildguessing, no idea.

@shinyoukai@neko.laidback.moe Because you might not want to commit all changed files in a single commit. I very often make use of this and create several commits. In fact, I like to git add --patch to interactively select which parts of a file go in the next commit. This happens most likely when refactoring during a feature implementation or bug fix. I couldn’t live without that anymore. :-)

If you have a much more organized way of working where this does not come up, you can just git commit --all to include all changed files in the next commit without git adding them first. But new files still have to be git added manually once.

@lyse@lyse.isobeef.org Well, I used SnipMate years ago (until 2012). IIRC, it’s more than just “insert a bit of text here”, it can also jump to the correct next location(s) and stuff like that. Don’t remember why I stopped using it.

Then I used nothing for a long time. Just before Christmas, I made my own plugin (… of course …), which does everything I need at the moment (and nothing more).

It can insert simple templates and then jump to the next location:

https://movq.de/v/67cdf7c827/sisni%2Dpython.mp4

And replace a string after insertion:

https://movq.de/v/67cdf7c827/sisni%2Dheader.mp4

(It’s not public (yet?) and it also uses vim9script, so I guess it wouldn’t work on your system.)

@lyse@lyse.isobeef.org I’m toying with the idea of making a widget/window system on top of Python’s ncurses. I’ve never really been happy with the existing ones (like urwid, textual, pytermgui, …). I mean, they’re not horrible, it’s mostly the performance that’s bugging me – I don’t want to wait an entire second for a terminal program to start up.

Not sure if I’ll actually see it through, though. Unicode makes this kind of thing extremely hard. 🫤

@lyse@lyse.isobeef.org I can tell you this right now, writing assembly / machine code is fucking hard work™ 😓 I’m sure @movq@www.uninformativ.de can affirm 🤣 And when it all goes to shit™ (which it does often), man is debugging fucking hard as hell! Without debug symbols I can’t use the regular tools like lldb or gdb 😂

I need to update my profile page now that I finished my PhD… I wonder what should I write…

This animation is made with points in a Python collections.deque data structure, added by dragging the mouse (code shown bellow) 🔭 I'm currently working on a PhD at Unicamp. 🌱 I should be talking less and concentrating, but... 💬 Ask me about drawing with Python! Check out py5 and pyp5js, they bring in the vocabulary from Processing & P5js! I try to make a new drawing with code everyday, and I put the results at skech-a-day. 👯 I’d like to collaborate on open resources to teach programming. I collect tools for teaching Python in a visual output here. If you find the things I share here usefull, consider supporting my work! You can use this PayPal donation link, Wise, liberapay.com/villares, or if you are in Brazil, PIX: 46c37783-5edb-4f1c-b3a8-1309db11488c (chave aleatória). You can check out my Domestika course, Design with Python " target="_blank"> Image

@shinyoukai@neko.laidback.moe Nah it’s more like there’s a lot of repeated code, because when you go from source language to intermediate representation to machine code, well you just end up writing a lot of the same patterns over and over again. I need to dedupe this I think.

My little toy operating system from last year runs in 16-bit Real Mode (like DOS). Since I’ve recently figured out how to switch to 64-bit Long Mode right after BIOS boot, I now have a little program that performs this switch on my toy OS. It will load and run any x86-64 program, assuming it’s freestanding, a flat binary, and small enough (< 128 KiB code, only uses the first 2 MiB of memory).

Here I’m running a little C program (compiled using normal GCC, no Watcom trickery):

https://movq.de/v/b27ced6dcb/los86%2D64.mp4

https://movq.de/v/b27ced6dcb/c.png

Next steps could include:

• Use Rust instead of C for that 64-bit program?
  
• Provide interrupt service routines. (At the moment, it just keeps interrupts disabled.)

I’m still deciding if I want to watch #Pluribus. When people told me Carol only wanted to meet the English speaking “imune” people it was such a turn off… like, it sounds rather offensive…

@prologic@twtxt.net Not even entirely sure how I did it myself, but likely a lucky combination of the new tail swirl, the legs closer to the screen being bigger and the head looking slightly to the side (eye & ear position), with bottom part of the hair, going behind the snout. The white is just an outline, around most of my works, so I don’t think that plays a part.

@movq@www.uninformativ.de Maybe there’s another meaning I’m not aware of, but this doesn’t look like a shitpost to me. Congrats, I guess. ;-)

@movq@www.uninformativ.de Very nice! I often wish other languages had something similar. Sometimes, I use lambdas, but that also looks ugly and feels a bit like a misuse. Other times, just the normal blocks are enough, but it’s not the same. Especially with the mutability aspects as the article explains. Typically, I just put it in a function or ignore it if it’s just a few lines.

@kiwu@twtxt.net Assembly is usually the most low-level programming language that you can get. Typical programming languages like Python or Go are a thick layer of abstraction over what the CPU actually does, but with Assembler you get to see it all and you get full control. (With lots of caveats and footnotes. 😅)

I’m interested in the boot process, i.e. what exactly happens when you turn on your computer. In that area, using Assembler is a must, because you really need that fine-grained control here.

@movq@www.uninformativ.de Not sure what it had in its beak. It looked a wee bit like a large biscuit. But it must have been rock-hard.

@zotero@zotero I noticed that some combinations of XFCE appearance (light) themes and Zotero made the menu “disappear” (black on black) as the window title was dark. Changing the Zotero to a dark theme or changing the XFCE theme worked (but then, I liked the dark window title on a light theme best…). Should I try to open an issue about this, or is it a XFCE issue? I don’t want to burden the maintainers but it was a bit disturbing not to find the menus…

I rewrote all my solutions in Rust (except for day 10 part 2) and these are the runtimes on my i7-3770 from 2013 (this measures CLOCK_PROCESS_CPUTIME_ID, not wallclock):

day01/1 [      00.000501311] Result: 1066
day01/2 [      00.000400298] Result: 6223
day02/1 [      00.000358848] Result: 12586854255
day02/2 [      00.000750711] Result: 17298174201
day03/1 [      00.000106537] Result: 17405
day03/2 [      00.000404632] Result: 171990312704598
day04/1 [      00.000257517] Result: 1626
day04/2 [      00.007495342] Result: 9173
day05/1 [      00.000237212] Result: 505
day05/2 [      00.000142731] Result: 344423158480189
day06/1 [      00.000229629] Result: 4076006202939
day06/2 [      00.000279552] Result: 7903168391557
day07/1 [      00.000204422] Result: 1622
day07/2 [      00.000283816] Result: 10357305916520
day08/1 [      00.029427421] Result: 84968
day08/2 [      00.028089859] Result: 8663467782
day09/1 [      00.000310304] Result: 4764078684
day09/2 [      00.015512554] Result: 1652344888
day10/1 [      00.000796663] Result: 375
day10/2 [      --.---------] Result: 15377 (Z3)
day11/1 [      00.000416804] Result: 753
day11/2 [      00.000660528] Result: 450854305019580
day12/1 [      00.000336081] Result: 577
day12/2 [      00.000000695] Result: no part 2

A little under 90 ms total.

On my Samsung NC10 netbook from 2011 with its Intel Atom N455 at 1.6 GHz:

day01/1 [      00.003771326] Result: 1066
day01/2 [      00.003267317] Result: 6223
day02/1 [      00.003902698] Result: 12586854255
day02/2 [      00.006659479] Result: 17298174201
day03/1 [      00.000747544] Result: 17405
day03/2 [      00.002737587] Result: 171990312704598
day04/1 [      00.001263892] Result: 1626
day04/2 [      00.044985301] Result: 9173
day05/1 [      00.001696761] Result: 505
day05/2 [      00.000978962] Result: 344423158480189
day06/1 [      00.001387660] Result: 4076006202939
day06/2 [      00.001734248] Result: 7903168391557
day07/1 [      00.001295528] Result: 1622
day07/2 [      00.001809659] Result: 10357305916520
day08/1 [      00.277251443] Result: 84968
day08/2 [      00.284359332] Result: 8663467782
day09/1 [      00.003152407] Result: 4764078684
day09/2 [      00.071123459] Result: 1652344888
day10/1 [      00.005279527] Result: 375
day10/2 [      --.---------] Result: 15377 (Z3)
day11/1 [      00.003273342] Result: 753
day11/2 [      00.005139719] Result: 450854305019580
day12/1 [      00.002857552] Result: 577
day12/2 [      00.000004421] Result: no part 2

A little over 700 ms total.

I like this. You get performance that’s more or less in the ballpark of C, but without the footguns.

I’m having to write my own functions like this in mu just to solve AoC puzzles :D

fn pow10(k) {
    p := 1
    i := 0
    while i < k {
        p = p * 10
        i = i + 1
    }
    return p
}

@aelaraji@aelaraji.com Anytime! Glad you like it, too. :-)

Webp, though it has been around for a long while, wasn’t fully supported on all browsers until recently. The other formats has been in use for such a long time, proving to work just fine, that the advantages Webp provides haven’t been seemingly enough to merit a switch.

Google is also the one behind Webp, and, well, people don’t trust, nor like, them much.

Webp, though it has been around for a long while, wasn’t fully supported on all browsers until recently. The other formats have been in use for such a long time, proving to work just fine, that the advantages Webp provides haven’t been seemingly enough to merit a switch.

Google is also the one behind Webp, and, well, people don’t trust, nor like, them much.

@prologic@twtxt.net I like this one. Haven’t been to the Golden Bridge yet? Make sure you do!

@prologic@twtxt.net Yeah, I don’t like them either.

As for changelogs, I prefer hand-written ones over something automatically cobbled together. Typically, they are just utter rubbish in my experience.

@prologic@twtxt.net looks like a tiny green apple to me 😅 … but this site says maybe a Guava

I meant were. You get the idea.

Also, I just realized that simple links like that turn into inline images on twtxt.net. Nice! 🥳

I’m contemplating the idea of switching my activity pub instance from Gootosocial to a Pleroma one. While GTS is kinda cute (lightweight and easy to manage) of a software, the inability to fetch/scroll through people’s past toots when visiting a profile or having access to a federated timeline and a proper search functionality …etc felt like handicap for the past N months.

@aelaraji@aelaraji.com I like the sounds of this technique a lot redirecting these AI crawling assholes to multi gigabyte files! The only concern I have is how do you do it in such a way that you don’t end up destroying your own ISP speed test servers?

@bender@twtxt.net Would you like me to say moar words ? 🤣

@bender@twtxt.net Goes to show you just have a good nose for that. :^)

No doubt, I really do love them. Not only wonderful humans and like-minded, but also technically gifted. That made for a superb combination. I just hope the new team turns out to be equally great.

Bwahahahahaaahaaahaaahaaa, what a brilliant story! :‘-D I’ve been given at most ten weeks to return, let’s see. ;-)

@bender@twtxt.net That’s the best one of them. An almonds cake with hazelnut chocolate glaze. The one in front is similar, but with chocolate only. Gingerbread on the right. But it develops the best flavor and consistency only in a few weeks, right now it’s quite hard like a rock, but it will soften up.

All those years I always said that my teammates are THE VERY BEST I ever had. Fuck me, look at that, I didn’t leave the company, just changed projects and this is my farewell present: https://lyse.isobeef.org/tmp/abschiedsgeschenk-2025-12-03.jpg How absolutely beautiful is that, I’m in awe! Now I feel even worse deserting. :‘-(

This emblem is the fleur-de-lis of the world scout movement: https://en.wikipedia.org/wiki/World_Organization_of_the_Scout_Movement#WOSM_emblem I reckon I must have mentioned casually that I’m a scout. ;-)

I’m gonna ask here again because I’m really frustrated and literally no one else is responding anywhere can u guys please help me find a good video camera the biggest think I want is long battery life but I also want it to be cheap like under $200, if you yourself don’t know please ask a friend because I am not a tech nerd and looking for stuff like this is very hard for me

For those visiting Hanoi in the Old Quarters that are beer snobs like me; highly recommend this place called Local Craft Beer 🤩

Thinking about doing Advent of Code in my own tiny language mu this year.

mu is:

• Dynamically typed
  
• Lexically scoped with closures
  
• Has a Go-like curly-brace syntax
  
• Built around lists, maps, and first-class functions
  

Key syntax:

• Functions use fn and braces:
  

fn add(a, b) {
    return a + b
}

• Variables use := for declaration and = for assignment:
  

x := 10
x = x + 1

• Control flow includes if / else and while:
  

if x > 5 {
    println("big")
} else {
    println("small")
}

while x < 10 {
    x = x + 1
}

• Lists and maps:
  

nums := [1, 2, 3]
nums[1] = 42

ages := {"alice": 30, "bob": 25}
ages["bob"] = ages["bob"] + 1

Supported types:

• int
  
• bool
  
• string
  
• list
  
• map
  
• fn
  
• nil
  

mu feels like a tiny little Go-ish, Python-ish language — curious to see how far I can get with it for Advent of Code this year. 🎄

The https://pyscript.com “platform” for hosting/serving and sharing #pyscript projects seems very cool… I wish they had a “download project” button to make it easy to move your project elsewhere. As they seem to be moving towards some “paid tier features”, making it easy to take everything out would be nice, would feel less like putting on a risk of being inadvertently locked in.

@prologic@twtxt.net pretty neat looking boat. We don’t see boats like this around here. It looks to be made specifically to resemble an older boat.

@prologic@twtxt.net pretty cool! I like these, wish there was a way (I am sure there is, but not for tourists) to go to the top. :-)

@prologic@twtxt.net Tada! There you once hope for your flight and ride to be delayed and then of course they are right on time! :-D You gotta wait either way. ;-) Looks like you got some good drinks, though.

@bender@twtxt.net a mobile phone camera doesn’t cut it because it cant take long videos. I would say like the cheapest possible tbh! it doesn’t have to be an amazing grade a camera, just something that will record in decent quality for long periods of time! I mostly want it to make vlogs :p

As someone that almost exclusively uses “Discover”, that is. If you do use it like I do, you know I mean.

@movq@www.uninformativ.de All good! 👌 Likely bug on my end (bridge)

@lyse@lyse.isobeef.org Oh yeah, there’s lots of them here. Even in winter when it’s freezing outside. I’m always baffled to see parrots in the snow … feels like a paradox. 🥴

@prologic@twtxt.net it would have been so much easy to run your own. I guess we all like to suffer every once and then, and this time is your turn. 😅

Oh fuck me! I had basically turned off the route to git.mills.io last night and went ot bed at ~2AM after unsuccessfully trying to control the attacks (bad bots) that were behaving like a DDoS attack. Tried to re-enable the route this monring and *BOOM, they’re back! As-if they never stopped?! what da actual fuq?! Anyone have any clever ideas of what I can do here to allows normal users, like you nice folk and block ths obnoxious traffic?!

When I try to login to PayPal I now see:

Please enable JS and disable any ad blocker

Here’s the thing. PayPal takes fees from transactions and payments received and sent.

I have very right not have ads shoved in my face for something that isn’t actually free in the first place and costs money to use. If PayPal would like to continue to piss off folks me like, then I’ll happily close my PayPal account and go somewhere else that doesn’t shove ads in my face and consume 30-40% of my Internet bandwidth on useless garbage/crap.

#PayPal #Ads

One day I’ll like to elaborate why I’m against the usage of Anubis (and its derivatives) for the rampant crawlers

@movq@www.uninformativ.de I think you will like this one: https://gibberifier.com/

** Sticker party, November **
Some random thoughts including how the band Imagine Dragons is kinda like Metal for kids; distributing apps, even without involving Apple at all, is deeply annoying on macOS; Pokemon ZA is fun, but I think that I’m a turn-based girlie at heart; my partner has been playing a lot of Tears of the Kingdom lately, it has been a lot of fun for me to watch, and hair-pullingly frustrating for our nearly 10 year old who has strong opinions about the correct order of operations in that game; I wrote, but am cu … ⌘ Read more

This is what this looked like visually 😳

@prologic@twtxt.net Time to make a new internet. Maybe one that intentionally doesn’t “scale” and remains slow (on both ends) so it’s harder to overload in this manner, harder to abuse for tracking your every move, … Got any of those 56k modems left?

(I’m half-joking. “Make The Internet Expensive Again” like it was in the 1990ies and some of these problems might go away. Disclaimer: I didn’t have my coffee yet. 😅)

And regarding those broken URLs: I once speculated that these bots operate on an old dataset, because I thought that my redirect rules actually were broken once and produced loops. But a) I cannot reproduce this today, and b) I cannot find anything related to that in my Git history, either. But it’s hard to tell, because I switched operating systems and webservers since then …

But the thing is that I’m seeing new URLs constructed in this pattern. So this can’t just be an old crawling dataset.

I am now wondering if those broken URLs are bot bugs as well.

They look like this (zalgo is a new project):

https://www.uninformativ.de/projects/slinp/zalgo/scksums/bevelbar/

When you request that URL, you get redirected to /git/:

$ curl -sI https://www.uninformativ.de/projects/slinp/zalgo/scksums/bevelbar/
HTTP/1.0 301 Moved Permanently
Date: Sat, 22 Nov 2025 06:13:51 GMT
Server: OpenBSD httpd
Connection: close
Content-Type: text/html
Content-Length: 510
Location: /git/

And on /git/, there are links to my repos. So if a broken client requests https://www.uninformativ.de/projects/slinp/zalgo/scksums/bevelbar/, then sees a bunch of links and simply appends them, you’ll end up with an infinite loop.

Is that what’s going on here or are my redirects actually still broken … ?

I just noticed this pattern:

uninformativ.de 201.218.xxx.xxx - - [22/Nov/2025:06:53:27 +0100] "GET /projects/lariza/multipass/xiate/padme/gophcatch HTTP/1.1" 301 0 "" "Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/112.0.0.0 Safari/537.36"
www.uninformativ.de 103.10.xxx.xxx  - - [22/Nov/2025:06:53:28 +0100] "GET http://uninformativ.de/projects/lariza/multipass/xiate/padme/gophcatch HTTP/1.1" 400 0 "" "Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/112.0.0.0 Safari/537.36"

Let me add some spaces to make it more clear:

    uninformativ.de 201.218.xxx.xxx - - [22/Nov/2025:06:53:27 +0100] "GET                       /projects/lariza/multipass/xiate/padme/gophcatch HTTP/1.1" 301 0 "" "Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/112.0.0.0 Safari/537.36"
www.uninformativ.de 103.10.xxx.xxx  - - [22/Nov/2025:06:53:28 +0100] "GET http://uninformativ.de/projects/lariza/multipass/xiate/padme/gophcatch HTTP/1.1" 400 0 "" "Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/112.0.0.0 Safari/537.36"

Some IP (from Brazil) requests some (non-existing, completely broken) URL from my webserver. But they use the hostname uninformativ.de, so they get redirected to www.uninformativ.de.

In the next step, just a second later, some other IP (from Nepal) issues an HTTP proxy request for the same URL.

Clearly, someone has no idea how HTTP redirects work. And clearly, they’re running their broken code on some kind of botnet all over the world.

Looks like she had amazing sex (ushikani kassen) [blue archive] ⌘ Read more

@kiwu@twtxt.net I’m glad you’re liking the updates haha 😆

@lyse@lyse.isobeef.org @bender@twtxt.net Pfft, they want folks to relocate to Sydney. Fuck that 🤣 Sydney is a bit like San Francisco, I’m not actually sure which is worse. Fuck’n expensive as hell, the only palce you’d be able to afford to buy or rent is at least ~2hrs out of the city by public transport (i.e: train) and by that time you’ve just pissed your life down the toilet, because you’d be expected ot work a 9-10hr day + 2-3hrs of travel each way, buy the time you factor in having to wake up super early to get ready to travel in to work, you basically have zero time for anything else, let alone your ufamily,

Fuck that.

Lady Mejiro likes it (shiwudesu) [umamusume] ⌘ Read more

I was looking at some ancient code and then thought: Hmm, maybe it would be a good idea to see more details in this error message. Which of the values don’t line up. On the other hand, that feature isn’t probably used anyway, because it’s a bit ugly to use (historically evolved). And on top of that, most teams need something slightly different, if they deal with that sort of thing.

I still told my workmates about it, so they could also have a look at it and we can decide tomorrow what to do about it. Speaking of the devil, no kidding, not even half an hour later, a puzzled tester contacted me. She received exactly that rather useless error message. Looks like I had an afflatus. ;-)

It’s interesting, though, that in all those years, nobody stumbled across this before. At least we now know for sure that this is not dead code. :-)

@bender@twtxt.net Haha 🤣 Spoken like someone that’s done this before 😅

** Gundam is just the same as Jane Austen but happens to include giant mech suits **
A friend recently asked how to get started watching Gundam, and as I tripped all over myself, equal parts excitement and not wanting to sound like a lunatic, I fumbled around for a good answer.

What I landed at was inelegant and I eventually panicked and found a watch list online. BUT! BUT! What is a blog for if not do overs!? Also, what follows has literally no i … ⌘ Read more

@kiwu@twtxt.net Oh! you like? 👍 Haha 😆

@bender@twtxt.net Glad you like them! :-) Those colorful roof shingles are absolutely stunning. The golden building has quite a few folds in the facade skin, from the other sides a bit more. Check out this: https://upload.wikimedia.org/wikipedia/commons/0/07/Rems_in_Schw%C3%A4bisch_Gm%C3%BCnd.jpg Luckily, there weren’t this many people around today. :-)

Don’t think this is the norm, though, most stuff here is also much more modern. There are not a whole lot of historic buildings left. And if there are, they’re not necessarily kept in good shape. But some are. So, don’t be fooled by my biased preselection of typically photographing the nicer ones.

The people photos are not for the internet. ;-) But I get your point, the reason why I ended up in that town is irrelevant and misleading, I should have introduced it differently. :-D

@lyse@lyse.isobeef.org wow, 31 is truly a telling! Interesting facade on that building on 10! And that roof on 51, oh my! The golden Jesus and tower on 7 are something else too.

I miss Europe like hell, mate! A lot of things around here are younger than me. I don’t feel history, I am history. 😅

On “family day”, I was expecting to see more pictures with people in it. All lovely, nevertheless. Thanks, as always, for the mini-vacation! 🙈