@dce@hashnix.club nah that’s pretty hot 🥵

@movq@www.uninformativ.de I understand. Take a break and bear up! Still looking forward to any of your stuff. :-) Thank you very much for all the great things I learned from you and wonderful conversations we had. In a while, crocodile. :-)

@movq@www.uninformativ.de You will always have a welcome “virtual” home around here 🤗

@david@daiwei.me Sorry, I can’t do this anymore. A large part of my work (text, code, thoughts, …) of the last 20-25 years has been stolen and is now being sold at rampant prices to idiots who then complain about me being a backwards bitch (I get to hear this every single day). Everything I say and do in public is being abused.

Fuck that, I’m out.

@david@daiwei.me Thanks, mate! I just finished my two full version marking gauges. And I’m rather pleased with them, I think they turned out great if I say so myself.

https://lyse.isobeef.org/tmp/streichmass-mit-messerrad/

The beech fences (80 and 100mm long) were part of a former table frame that I cut down. I plugged the dowel holes with, well, dowels. The horrific looking one was the stuck original one, though. Luckily, it’s a hell lot worse on camera than in person. If you take a close look, you’ll also be able to see the large but slight chamfers one one side each that I just left alone.

I really like beech wood. It looks beautiful, is rather heavy (at least in comparison to spruce which I typically use) and thus rock solid, is also a blast to plane and the list goes on. I sanded it with 180 grit and it’s smooth as a baby’s bottom.

The 25mm beech round stocks that house the brass knurled nuts are now roughly 4cm long. That’s one thing I wanted to change right after my first experience. If they were rounded or chamfered more, it would probably be even nicer for the fingers when using the marking gauge. They’re sunken in roughly 3mm in the fences. A forstner bit made quick work. This simplified alignment during glue-up a lot. Will definitely do that again if I happen to build more. I could fully concentrate on the grain orientation and it didn’t shift around.

Just like in the prototype, I used 8mm aluminium solid round bar again for one of the marking gauges. It’s also about 15cm in length. I figure that’s enough. The bought marking gauge has a twenty-something and some change steel rod. So far, all my markings didn’t even exceed probably 50mm.

I found the 8mm brass pipe laying around on the workshop. Didn’t know anymore I had it for ages. Unfortunately, the wall thickness is below a millimeter, so my 6mm wooden dowels are sliding in there. Thus, I put 8mm dowels in my drill chuck and reduced the diameter with a rasp. I went a tiny bit too far, the press fit is on the loose side. When drilling with a 2mm drill (I did that on purpose to hopefully cause the dowel to expand a bit more in the pipe, typically the tap hole for M3 is 2.5mm) and tapping M3, the downsized and glued in dowel slipped down the pipe. Should have used construction adhesive or something along those lines. Anyway, I might replace it with a solid one. I consider this a half-successful experiment. I fear that an unfavorable grain direction might pull out the cutting wheel during use. Let’s see.

The finish of all three is boiled linseed oil. It looks nice, but oh by, this smell. I really dislike it. My hands stink even after washing them several times. I still got several liters left, so I have the dubious joy to use it on many, many other projects to come.

Oh, one last thing. Didn’t manage to drill the tiny holes for my M3x16 bolts perfectly in center like for the prototype. They’re a tiny bit off. Also, on the longer fenced marking gauge, the hole for the knurled nut is a little to the side and at an angle. No idea how I messed this up. Luckily, it’s just a look thing but doesn’t impair use.

@david@daiwei.me We’re slowly getting there. Very slowly. 8-)

@chrisgarrod@twtpub.com Hello 👋 Welcome to Yarn.social / Twtxt 🙌

@david@daiwei.me I bet, you’re absolutely right. ;-) Let’s start the countdown: 10, …

@arne@uplegger.eu @david@daiwei.me Most do actually look really good, but of course I prefer the birds. :-)

Can’t have them all, because it’s even harder to spot counterfeit notes I reckon.

@david@daiwei.me Hahaha, I love it! :‘-D I need very high precision pliers.

Image

But now I’m owed something for that! Nearly made up for it. I can use the new clamp to press hard and shrink the coin a bit.

Image

Welches Euro-Scheinerl hättens denn gern?

Es gibt eine öffentliche Online-Umfrage zu den Gestaltungsvorschlägen möglicher neuer Euro-Scheine.

Bis zum 21. September kann abgestimmt werden.

@movq@www.uninformativ.de give up on what?

@movq@www.uninformativ.de LOL 🤣

@david@daiwei.me I’ll find one 😅

@movq@www.uninformativ.de “when this stuff still mattered” LOL, true :-D

Right, the good old pen test! Never gets old. :-D

@lyse@lyse.isobeef.org That sounds pretty elaborate. We did something similar last year (when this stuff still mattered, lol), but it was super easy to spot.

And then there was this, of course:

Image

@movq@www.uninformativ.de Zur Hardware zurückzugehen merke ich hier (noch?) nicht. Aber sonst alles andere, ja und ja. Ganz genau.

@movq@www.uninformativ.de When a mate was learning Czech a few years ago, he sometimes told us about some crazy words and sentences. But it could very well be that these were out of norm extremes. Not sure. You’re right, I also expected a little worse. :-)

@thecanine@twtxt.net Hahaha, this is cool! :-D

@thecanine@twtxt.net This is brilliant, I love it. 😃

@lyse@lyse.isobeef.org there is a Czech song, intentionally written to include no vowels except “a”, with “a” being included in every word, except the one letter long ones:
https://youtu.be/eB1cL4I5OZ8

This is obviously not common, and the author is a legend for accomplishing this.

@lyse@lyse.isobeef.org Hmm! I expected worse. 😅 (Never heard Czech in person.)

https://translate.google.com/?sl=auto&tl=cs&text=good%20morning%2C%20how%20are%20you%20today%3F%20my%20name%20is%20katharina%20and%20I%20am%20eating%20a%20banana%20and%20hopefully%20also%20an%20apple.%20everything%20I%20say%20is%20a%20consonant.%20Or%20maybe%20not!&op=translate

@prologic@twtxt.net I only have one potential machine for this: My old netbook. I don’t want to accidentally brick it, though … 😅 It was scary enough to run my own OS on this.

@lyse@lyse.isobeef.org

Aber Auslöffeln werden es trotzdem wieder ganze andere Leute müssen. Wie immer. Das ist das bittere an der Sache. Trifft immer die Falschen.

Prinzessin Müllabfuhr. Den Namen mache ich mir jetzt zueigen. Mich dagegen wehren kann ich eh nicht. 😐

Kollege meinte mal halb sarkastisch, irgendwann werden Firmen dann wieder Menschen einstellen, weil die billiger sind.

Wir gehen teilweise von Cloud-IaaS-Hostern wieder zurück zu Hardware, weil das billiger, flexibler, schneller ist … Derzeit zumindest. Die Cloud-Hostern kommen mit dem Nachkaufen von RAM nicht hinterher, sodass ständig „die Cloud voll“ ist. (Und, ja, natürlich wird sich darüber heftigst aufgeregt, aber dass das genau am eigenen Verhalten, nämlich der religiösen Liebe zur AI, liegt, merken sie nicht.)

Es ist auch jedes Augenmaß weg. Die „fette“ Kiste mit 64 CPUs, 256 GB RAM und 2 TB Platte wird nach allen Regeln der Kunst vollgekleistert. Irgendein Furz-Workload braucht 24 GB RAM, aber das ist jetzt normal und wird akzeptiert. So ist das jetzt halt.

@david@daiwei.me if you have some weekend home type place, with no Internet, getting TV through an antenna and a DVBT box, my recommendation is to just buy some old Dell monitor with HDMI to 3.5mm audio output built in, so you can connect speakers to it.

Doesn’t have to be Dell, but you can often just buy one of those from your employer, for under $25 here.

Were this sadly makes much less sense, in with Internet TV services. Those usually need a dedicated TV app to function and while that can be replaced with a $200 TV box, that some providers force you to rent, thus making you pay more for your Internet TV forever - this also means giving up the “archive app”, that gives you access to all the on demand content, included in the price of your mandatory TV license. None of these overpriced boxes come with it, as they’d mauch rather make you pay, for yet another subscription service instead.

So yes, you can kinda do it with an Internet TV too, assuming you trust the expensive box to not spy on you, but in that case you’re mostly just paying a whole lot more, for a lot less, than you would be, with the LG TV.

@david@daiwei.me I don’t believe in impossible! 🤣

@movq@www.uninformativ.de Good question. Short answer, I don’t know. But I’ll look at this a bit more closely.

@movq@www.uninformativ.de No I haven’t :/

Just out of curiosity, have you ever ran this on real hardware? 😃

Only QEMU. Would you like to help test it on real hardware? 😅 I’m not sure I have anything worth testing it on!

@movq@www.uninformativ.de Maybe it’s already too late ‘o clock, but I don’t find it overwhelmingly crazy. The Czechs, on the other hand, do they even know what vowels are? :-D

@movq@www.uninformativ.de Da hilft nur, die alle mit vollem Karacho gegen die Wand fahren zu lassen. Aber Auslöffeln werden es trotzdem wieder ganze andere Leute müssen. Wie immer. Das ist das bittere an der Sache. Trifft immer die Falschen.

Kollege meinte mal halb sarkastisch, irgendwann werden Firmen dann wieder Menschen einstellen, weil die billiger sind.

@prologic@twtxt.net Just out of curiosity, have you ever ran this on real hardware? 😃

Hm, interesting: https://git.mills.io/prologic/muos/src/branch/main/nucleus/nucleus.asm You’re clearing the VGA buffer in each mode (real mode, protected mode, long mode). Why’s that? Wouldn’t it be good enough to only do that after you’ve reached long mode? 🤔

@lyse@lyse.isobeef.org Ja und auch so: „Raus mit den Entwickler:innen! Das Marketing macht seine Software jetzt mit KI selber!!1!“ Kannste dir alles nich ausdenken. (Jaja, ist natürlich im Moment billiger. Aber diese Kurzsichtigkeit …)

@david@daiwei.me I seei tnow 👌

@movq@www.uninformativ.de Pff, wer will schon Ansätze von Qualität? GESCHWINDIGKEIT!!!

@prologic@twtxt.net @david@daiwei.me I agree about @xuu@txt.sour.is (still a few months left before hitting this timeout). :-D

But I don’t know the feeds anymore, because, well, I deleted them. :-D

@david@daiwei.me Yeah, it’s a bee keeper channel. Oh, with all the epoxy, this handle is really strong.

@lafe@tilde.club Try again, that’s only a quarter of the year! :-P

@thecanine@twtxt.net This is of course disgusting! I have first hand experience with my neighbors next door where I told them about one of their LG (older models) “spying” on what they were watching. I’ve of course since blocked that shit™ at the network level for them, But man, don’t ever buy LG. In fact don’t ever buy any of this “Smart” shit™. Period.

@bender@twtxt.net probably just too busy with real life and work to interact with us plebs 🤣

@david@daiwei.me Danke 🙏

@lyse@lyse.isobeef.org which ones?

@david@daiwei.me Go ahead and grab something, mate!

Image

@david@daiwei.me Cool! 😎 Though I think this can be improved somewhat.

@david@daiwei.me Might not have tested that path very well. Can you make a note of this on Gitea?

@david@daiwei.me you’re not missing anything. It is only set on grant / connection time. If you disconnect and reconnect, it should become an option. I haven’t figured out how to refresh capabilities.

@david@daiwei.me You’re not missing anything. It is set on grant / connection time. So disconnecting and reconnecting will give you that option. I haven’t figured out a way to refresh backend capabilities like this.

@movq@www.uninformativ.de Great, I had some cherries. :-)

@GabesArcade@gabesarcade.com You are most welcome! 🙏

@GabesArcade@gabesarcade.com twtd landed too 🥳 Hosted feeds (twtpub.com) and self-hosted twtd can publish # follow = now — the operator offers it with --allow-follows, then it’s the same toggle in Settings. Off by default at both ends 👌

@GabesArcade@gabesarcade.com Both 😅 Just shipped: Settings → Backup & restore. Export everything (or follows only) as a JSON file and import it back — or feed it any twtxt.txt and it’ll harvest the # follow = lines. There’s a copy-paste # follow = block in there too if you’d rather hand-edit 👌

@GabesArcade@gabesarcade.com So we going with an Import/Export feature? Or would you also like optionally to write # follow = into the feed too? 🤔 Can do either/or or both.

@david@daiwei.me This has now been fixed! 🎉

@GabesArcade@gabesarcade.com I think it would have to be specific to the App itself. So say you somehow didn’t save a recovery key or some shit™ You could still get back up and running with ease if you had exported a config? 🤔

Okay I’m fixing this in lextwt, yarnd and twtxt.app (takes a different path). Soon you’ll be able to write shit™ like (<this>) and it’ll get escaped and rendered correctly on the page. Basically you are really writing HTML here, but not intending to do so, Twtxt never supported HTML, and I don’t think it ever should. We extended the format to support basic Markdown, and I think that’s where it should end.

Probably time we wrote a Spec for this really.

@GabesArcade@gabesarcade.com Based on your description, I think it makes snse to have an Import/Export settings in the UI? RIght? 🤔

@david@daiwei.me Kk I’ll look into it 👌

@david@daiwei.me I mean we can probably do that I suppose. I’d make it an option in Settings though?

@david@daiwei.me I see it now. Is this also a problem in the app too? Or just yarnd or both?

@GabesArcade@gabesarcade.com Probably. How do you want this to work? An “Export” button to export all your settings in some form?

@david@daiwei.me Sorry, I’m not seeing what you’re saying? 🤔

@itsericwoodward@itsericwoodward.com lol! “Yeah, it was me. What you gonna do about it? Hm? Hm?” Cats. Typical arrogant cats. 😂

@lyse@lyse.isobeef.org Pretty good! Had an apple, too. 🤣

@lyse@lyse.isobeef.org Ha! 😂

@david@daiwei.me Oh yeah, a full belly stops everything. :-D

@movq@www.uninformativ.de Dang it! You gotta have a chance again after sunset. :-)

@prologic@twtxt.net Sounds cool, I gotta take a look at it when my brain has some free capacity. :-)

@movq@www.uninformativ.de A mate showed me a graph reaching 40°C… :-O It’s going to be hell on earth.

@lyse@lyse.isobeef.org I also got up at 5 (I always do 😅) and went on a quick stroll around 6:30, but boy, that was chilly. So I said to myself: Screw that, I’ll try again later.

And now we’re at 32 °C. 🤣

@movq@www.uninformativ.de It’s “shaping” up to where I think I want it to go 😅

@prologic@twtxt.net Yeah, sound impressive, I gotta try this. 👌

@david@daiwei.me Yes!

So, a hobby OS, just like Linux was for Linus?

Although this is really an exercise is self-hosting a lagnguage, then self-hosting the language to build a self-hosting OS. It’s all meta-circular.

@david@daiwei.me It’s somewhat expected to have a fair bit of Assembly (machine code) to get some of the bits you need going. But I think I can reduce this a bit. Let’s see…

@movq@www.uninformativ.de Type hints are just… so weird.

@movq@www.uninformativ.de I see! :-D So, how was your banana then?

@lyse@lyse.isobeef.org Ruff, the formatter/linter, yeah.

Lol, never heard of that banana moment before, but it sounds very fitting. :-D

No wonder. I just made that up. 🤣

@movq@www.uninformativ.de I hear you! It’s so annoying. Ruff, the formatter?

Lol, never heard of that banana moment before, but it sounds very fitting. :-D

@movq@www.uninformativ.de That’s cool! :-)

@lyse@lyse.isobeef.org

For the tags feed it would be cool to include the actual changelog entries

Did that now:

Image

🥳

@movq@www.uninformativ.de Oh dear, Thunderbird became such garbage.

@movq@www.uninformativ.de You know you could in theory use the Twtxt App and the Twtxt Feeds service as your “news reader” right? 😅

@lyse@lyse.isobeef.org Bingo!

Oh, yeah, newsboat is good. For this particular use case, I explicitly needed a graphical feed reader, though. 😅 I ended up using Thunderbird, which has its own interesting way of configuring/adding feeds:

https://movq.de/v/a3557e3dc9/vid-1784952576.mp4

Why are feeds categorized as “Mail”? What’s going on with that “Add” button on the left of the dialog? Why does the dialog indicate that there’s a folder called “list-files Recent Commits” which doesn’t really exist in the end? (Why does it take about 1-2 seconds to load 25 feed items?) And so on.

@GabesArcade@gabesarcade.com LOL 😂

@eldersnake@we.loveprivacy.club Login to https://feeds.twtxt.net/ with your Pod’s account. Re-create whatever you like. In the end I had to start over, there was too much mess. As you can no doubt imagine, the reason for revamping the feeds service was to thwart SPAM and Junk.

@movq@www.uninformativ.de Since you ask, it must be only the one in the title bar, but not the one below. :-( Let me suggest Newsboat to you: https://newsboat.org/

@movq@www.uninformativ.de Not sure, I very rarely see people wearing cowboy hats. They’re a great protection against the sun in my opinion. Even as a child, I always loved their looks, but I only wear them in summer for that particular reason. Unfortunately, they’re too cumbersome to carry around not on your head. And they don’t combine with bicycle helmets or head rests.

About one and a half decades ago, I made two hats myself. Sadly, they both turned out to be failures.

Haha, now that you mention the aliens, I cannot unsee them anymore. :-D

@lyse@lyse.isobeef.org Hats are back, aren’t they? Lots of people wearing hats these days, like, the big ones. 🤔

06.jpg looks like it’s from another planet. 😅

@david@daiwei.me You better stick to your doctor’s prescription of mowing three times a week.

@david@daiwei.me Thank you! They were so busy, my camera got dizzy:

Image

@prologic@twtxt.net Seems to work? 🧐

Dang it, @david@daiwei.me, you blew my cover!

I was raised without a TV, so I don’t miss it one bit. My parents just didn’t by a new one after their super old black and white device died. Looking after a baby was maybe spare time activity enough for them. :-P

When there was some super cool program I wanted to watch, like a James Bond movie, I visited my grandma. Sure, it sometimes was a pity that I could not join yesterday’s TV series discussions with my classmates, but oh well. I survived that. Building stuff with Lego or playing outside was all I really wanted.

Apart from a few really good programs, there’s sooooo much trash, non-stop ads and the like. Even as a kid, I was very disgusted by all that. But I have to admit that visting somebody with a TV and watching a good show was usually a highlight. These days, I can easily waste all my time and more on YouTube. :-/

@movq@www.uninformativ.de @klaxzy@klaxzy.net Same situation here.

Data protection, @dce@hashnix.club! :-D

This revealed another bug in my client that I still need to fix at some point. Inserting an empty set of messages failed with an SQL logic error. Whoops. I didn’t think about that corner case.

@klaxzy@klaxzy.net Hey, sounds exactly like the company I work(ed) for.

@movq@www.uninformativ.de Oh I agree. Long-term the whole thing is completely “fucked”. But it says more about “Cloud” and “X as a Service” than about “AI” itself. It’s a bit like all these fucking entertainment subscription services you need to entertain one’s self. How many subscriptions does one need to Hulu, Netflix, Disney+, Stan, etc, etc.

@prologic@twtxt.net Our company is paying a shitload of money for all these (different) AI tools … I’m probably not allowed to tell you the exact number, but it is a lot. The only other way would be to lay off employees, so we can pay even more for AI. (Needless to say, that would be the worst possible move.)

For a private person, $20 a month is also pretty expensive, isn’t it? And then assume that you maybe need more than one AI tool. You’re quickly up to $50 a month or much more. This isn’t something that I, as a private person, will ever be willing to spend for this kind of stuff.

“AI” is just expensive as fuck. On every level. They will have to (ab)use every possible way to squeeze more money out of it, and that includes ads and what not.

@GabesArcade@gabesarcade.com this sort of tells me two things 1) that enterprises aren’t really engaging with OpenAI and establishing lucrative enough contractual agreements and 2) users aren’t willing to pay for ChatGPT or if they are aren’t willing to pay much more than $20 a month

@dce@hashnix.club Was it ever really empty on the Codeberg side in the Git repo? 🤔

@aelaraji@aelaraji.com Perfect! :-D

@movq@www.uninformativ.de it’s a shame we have to ruin such great technology that only depends a lot of this with crappy bullshit nonsense like advertising we’ve been into responses 🤦‍♂️

@prologic@twtxt.net This was to be expected and I’m glad that it’s finally happening. I seriously hope that AI/LLM output gets swamped with advertisements or unwanted code, so people see what they have gotten themselves into, especially the “vibe coders”.

@david@daiwei.me You might have ended up loading the page in an unfortunate moment while I was reworking it. 😅 The CHANGES file is there, in the browser:

Image

@aelaraji@aelaraji.com Perfect! 👌