When we arrived for the setup, the Düsseldorf youth group was dismantling their camp on the same spot that we had originally booked. But the camp site manager told us that we were the only group on the entire camp site, so we could select any spot, whatever we liked. That was really great, because originally we would have needed to transport all food 150-200 meters from the kitchen to our site. Hence, we just decided to set up in front of the kitchen. We still could just use the entire camp site for games, separate the heavy snorers from the rest, etc.

The only downside was that the sanitary facility was on the other end of the camp site. So, when taking a shower, going to the loo, washing the dishes, we had to always hike over the entire camp site. The kids and their leaders had to do their dishes themselves, this was a tent camp, not a hotel visit after all. Being a member of the kitchen team, we of course took advantage of the dishwashing machines, though. :-) In a traditional tent camp, the kitchen’s dishes are washed by the rotating dish/kitchen service. All children have to participate in that a few times.

On the second to last full day, some camp constructions were built. That spot was another ten minutes hike into the woods. Not sure why the that program wasn’t done right at the beginning but towards the end. That would have been a great playground throughout the camp.

Image

FTR, also happens with Openbox on X11 and with labwc on Wayland, so this isn’t related to my custom X11 window manager.

I finally managed to finish reading “How fast are Linux pipes anyway?”: https://mazzo.li/posts/fast-pipes.html That’s cool shit. Very interesting, highly recommended.

@aelaraji@aelaraji.com Hahaha, I don’t recall when I first stumbled across it, but I’m sure it must have been the same experience you had.

Ignoring the consistent fuck-up of the decimal point (German reverses comma and dot, we use a comma as the decimal separator and the dot as the thousands separator), they managed to print the amount correctly in most e-mails. But the “shipping is underway” e-mail is broken. For ages.

@david@daiwei.me Thanks, mate! I just finished my two full version marking gauges. And I’m rather pleased with them, I think they turned out great if I say so myself.

https://lyse.isobeef.org/tmp/streichmass-mit-messerrad/

The beech fences (80 and 100mm long) were part of a former table frame that I cut down. I plugged the dowel holes with, well, dowels. The horrific looking one was the stuck original one, though. Luckily, it’s a hell lot worse on camera than in person. If you take a close look, you’ll also be able to see the large but slight chamfers one one side each that I just left alone.

I really like beech wood. It looks beautiful, is rather heavy (at least in comparison to spruce which I typically use) and thus rock solid, is also a blast to plane and the list goes on. I sanded it with 180 grit and it’s smooth as a baby’s bottom.

The 25mm beech round stocks that house the brass knurled nuts are now roughly 4cm long. That’s one thing I wanted to change right after my first experience. If they were rounded or chamfered more, it would probably be even nicer for the fingers when using the marking gauge. They’re sunken in roughly 3mm in the fences. A forstner bit made quick work. This simplified alignment during glue-up a lot. Will definitely do that again if I happen to build more. I could fully concentrate on the grain orientation and it didn’t shift around.

Just like in the prototype, I used 8mm aluminium solid round bar again for one of the marking gauges. It’s also about 15cm in length. I figure that’s enough. The bought marking gauge has a twenty-something and some change steel rod. So far, all my markings didn’t even exceed probably 50mm.

I found the 8mm brass pipe laying around on the workshop. Didn’t know anymore I had it for ages. Unfortunately, the wall thickness is below a millimeter, so my 6mm wooden dowels are sliding in there. Thus, I put 8mm dowels in my drill chuck and reduced the diameter with a rasp. I went a tiny bit too far, the press fit is on the loose side. When drilling with a 2mm drill (I did that on purpose to hopefully cause the dowel to expand a bit more in the pipe, typically the tap hole for M3 is 2.5mm) and tapping M3, the downsized and glued in dowel slipped down the pipe. Should have used construction adhesive or something along those lines. Anyway, I might replace it with a solid one. I consider this a half-successful experiment. I fear that an unfavorable grain direction might pull out the cutting wheel during use. Let’s see.

The finish of all three is boiled linseed oil. It looks nice, but oh by, this smell. I really dislike it. My hands stink even after washing them several times. I still got several liters left, so I have the dubious joy to use it on many, many other projects to come.

Oh, one last thing. Didn’t manage to drill the tiny holes for my M3x16 bolts perfectly in center like for the prototype. They’re a tiny bit off. Also, on the longer fenced marking gauge, the hole for the knurled nut is a little to the side and at an angle. No idea how I messed this up. Luckily, it’s just a look thing but doesn’t impair use.

So… my little experimental Mu (µ) OS is now ~8.7k of Mu and ~2k of Assembly, which makes this about an ~80/20 split. I’ve managed to achieve most of the goals I had set out, by ensuring a tiny Nucleus of only ~2k Assembly and all Policy, Services and Userland written entirely in Mu (a language I also deisnged and created, which still has no support for floats LOL)

I finally built a prototype of a marking gauge with a cutter wheel out of some scraps.

https://lyse.isobeef.org/tmp/streichmassprototyp-mit-messerrad/

It had been a long time in coming, I bought some replacement cutting wheels three years ago for exactly that purpose. I also found out that I need more M3 countersink bolts for future marking gauges that I want to make (maybe two or three more). Luckily, I had exactly one. I thought I got way more than that, but M3 is very, very scarce in my collection. My M3 bolt was barely long enough to attach the cutting wheel to the bar. But it’s okay for the prototype.

I was pleasantly surprised that I managed to drill the 2.5mm diameter hole almost perfectly in center in the 8mm diameter aluminium round bar. Center finder, drill press and vise with a vertical prism for the win!

I knew upfront that the M5 steel bolt to lock the bar in place definitely needs to be replaced with a brass or aluminium one (maybe with a knurled head). Otherwise, it cuts into the aluminium bar and leaves ugly marks. These burrs might even scratch the workpiece. But, of course, I don’t have any brass on hand either. Alternatively, I swap out the aluminium bar for a steel or even stainless steel one. Stainless might be tricky to precisely drill and tap, though.

I already learned a few things by making this prototype. The final wooden fence can be even a bit bigger. This round thing behind is also too short, I’d like it to be a tad longer and thicker. The final one will be made from hardwood, not spruce. Other than that, it’s great and already more practical than my store-bought marking gauge with its round fence. This only causes the tool to roll around on the workbench. Or even roll off. Stupid design.

@dce@hashnix.club I like the teal colors in the file manager.

So just because I enjoy this kind of thing (looking into laws and trying to understand them…):

GDPR is about roles, not ownership

There’s no property right in personal data under GDPR. The whole regime hangs on three roles:

• Data subject — the person the data is about.
  
• Controller (Art. 4(7)) — “the natural or legal person … which, alone or jointly with others, determines the purposes and means of the processing of personal data.”
  
• The rights in Arts. 16 and 17 are exercised by a data subject against a controller. They compel a third party to rectify or erase. They are not self-executing duties that a piece of software must expose.
  

That’s the key. In your architecture, for a user’s own posts about themselves sitting in their own feed on their own device:

• the user is the data subject, and
  
• the user is also the only person “determining the purposes and means” of that data.
  

There is no third party controller to compel. The “right to erasure” is a right to make someone else delete — and there is no someone else. It is satisfied the instant the user can change the file. A UI button is a convenience, not a legal requirement. Omitting it removes zero rights, because the data is a plain-text file the user can edit or delete by any means — editor, sed, git, their file manager. Full practical control is retained; nobody is being denied anything by anyone.

Windows NT 4 didn’t have a Device Manager. You know, this thing right here that got introduced with Windows 95:

Image

And that’s super awkward in NT4.

You know what doesn’t have a Device Manager, either? Linux. Why? 🤔 Isn’t this one of the most useful system tools? It gives you an overview of the devices in your system and tells you which driver is used for them. Linux could really use such a tool, I think? 🤔

(There are programs like “hardinfo” and I remember ancient KDE providing such a tool, but they’re all an afterthought. Hardly integrated into the overall system.)

@bender@twtxt.net Thanks, mate!

On the back of the bench, the badge says: “Gestiftet Verein berg hohenstaufen Göppingen 2013”. I read that as the Mt. Hohenstaufen club donated the bench itself:

Image

On the front of the bench, the badge says: “Gestiftet von Hildegard Schuster, Gesellschafterin der Schwarz-Gruppe, Firma Wackler”. The bronze lady was donated by a shareholder of the Schwarz group, specifically the local Wackler trucking and logistics company. Clip of 27 in original resolution:

Image

The book itself reads: “Zur Erinnerung an Ralph Kobza” It’s in memory of the sales manager of the art foundry next town that created also this statue. My mate took this photo:

Image

@balloonfu-sen@yarn.girlonthemoon.xyz Oh sorry you are right! The pod you’re on is managed by @kat@yarn.girlonthemoon.xyz I believe!

I didn’t manage to capture the hunting bat.

Image

@movq@www.uninformativ.de Oh my! :-O We reached 38°C. It’s now down one degree.

I just got up from my two, three hours siesta. And I tell you, that was bloody amazing. Layed in bed in undies, no blanket, just some power metal in my headphones and I was sleeping like a baby. Normally, I NEED a blanket, no matter what. But this summer, it’s already the second time that I actually manage to drop off without one.

🎵 Doganon - I fought management
(just a joke, those who know, know)

[verse]
Barkin’ at cars in the hot sun,
I fought management and uh they won,
I fought management and uh they won,
I needed a raise cause I had none,
I fought management and uh they won,
I fought management and uh they won,

[chorus]
I wake up at five and it feels so bad,
Guess my project’s gone,
It was the best team that I ever had,
I fought management and uh they won,
I fought management and uh,

[pre-churus]
Stuck in traffic since round 6:01,
I fought management and uh they won,
I fought management and uh they won,
I lost my team and project lost funds,
I fought management and uh they won,
I fought management and uh they won,

[chorus]

So I’ve been working on GoNIX the last few days… Which is derived from µLinux – At least it’s entire build process. GoNIX however has a 100% Go userland, including the init process, package and service management.

Now… As an experiment, because I was able to make much process on enhancing the build tools and package management, I decided to see if I could build a “Desktop” Gui of sorts…

I still wanted it to be fairly minimal and lightweight. So I went with wayland (of course) and labwc and yambar. So far I’m liking the result 👌 42 packages in the wayland-desktop meta port. Not too bad. Not sure if I can slim that down anymore… But trying to avoid Mesa/GL as that drags in far too much “cruft”.

I found my tripod and headed into the woods. There was a ton of glow. \o/ The fireflies were everywhere, super cool. It looked so amazing, especially with all the flying boys. There was one amazing spot in particular, I had 80-100 individuals in my view at once. Absolutely breathtaking. Unfortunately, the mozzies were also delighted about my visit.

I tried my best, but it’s impossible to capture anything on film with my equipment. The fireflies are just way too dim. In the end, I managed to get some very bright girls in the bush. That’s the best I could do, but still really bad. Sorry @bender@twtxt.net. :-(

https://lyse.isobeef.org/gluehwuermchen-2026-06-19/

And no idea what the heck is going on with the CSS there. Anyway. Garbage to trash, seems fitting. ;-)

@movq@www.uninformativ.de That’s right, way harder than centrally managed. They even didn’t reach concensus over the main folder: “Alle Programme, “Alle Programme (x86)”, “All Programs”, “All Programmes”, etc. Anyway.

For class 11 (or maybe already in 10, I don’t remember exactly) we could choose either between traditional maths class with a graphical calculator or “Mathe mit CAS”. There were two teachers in my entire school who were able to teach the latter. It was also fairly new at the time I believe. Certainly unheard of for a „allgemeinbildendes Gymnasium“, maybe the technical ones were already offering it for some time, not sure. It was clear to me that I would take the maths with CAS class.

Each kid had to buy their own Cassiopeia A-Something. I don’t know how much that thing was (definitely more expensive than a graphical calculator) and whether the school subsidized that in any form. But it was slow and underpowered as hell. We rarely used it in class nor for homework (most if not all had already a desktop at home). Typically, when we worked with the CAS, we sat down on the desktop computers. Our class took place in one of the two computer rooms. The desktops were placed on the three sides (left, right, back, facing the walls or windows) and the regular school desks were in the middle. Since there were more pupils than desktops, we always shared. Nowadays, we call it pair programming. ;-)

For the exams we had the “mandatory part” (Pflichtteil) without any tools. Once we finished that and handed the papers to our teacher, we were then allowed to boot up our Cassiopeias and work with them for the second part. Before the exam started, everyone had to show the teacher that they reset their small computer to factory settings. This second part was called „Wahlteil“. But you had to do it in order to pass. So, I never understood the choice of this term. Maybe it’s because the first part is the exact same for everyone (graphical calculator and CAS class), but the second part was definitely different for the two classes. Each suited to their tools.

After one or two exams, it became clear that the Cassiopeia was far from ideal. So, we took the second part at the desktop computers from then on. Our teacher unplugged the network cables himself to avoid cheating. Each computer had an “HDD Sheriff” running that reset the disk at startup. There was also an issue that the personal user accounts were affected by that. Sometimes all your data were lost. If you were lucky, they were still there. So, we saved our Maple project to local disk (if the computer didn’t crash in between, that was no problem) and at least eventually before leaving the classroom, we then also saved it on the server. For that, the teacher quickly plugged in the cable, we saved, and then the cable was unplugged again immediately. Oh, and everybody used their USB sticks, too.

All in all, this Cassiopeia A-* was quite a useless purchase. :-D I’m not sure if I still have it. At least I thought several times about giving it to the flea market. Don’t know if I did or not.

@lyse@lyse.isobeef.org

But it’s Windows, it doesn’t have a place in my heart.

The older I get, the more I’m glorifying anything pre XP. 😅 But that’s only because everything today is so horrible.

Well, not anything pre XP. 3.0 or newer would be nice, because Windows 2.x was still pretty bare bones:

https://movq.de/v/00162b9df8/

(OS/2 was great, though, except for the lack of a good file manager.)

@lyse@lyse.isobeef.org Ah, you mean the categorization. Yeah, that would never work in Windows, at least not without having a centralized package manager (so there’s one authoritative source of which program belongs into which category).

Oh wow, those Cassiopeias look pretty cool. Did you have one of those or one for each kid?

Show HN: I built 80 mini-games using Fable before it was shut down
Dear Hacker News,

I’m kindly asking for your participation in the open beta for my AI-managed mini-games website. Thank you in advance!

For a limited time window, I’m setting the all-free feature flag to true. I hope you have a lot of fun exploring the AI’s sense for games! Here and there, I tweaked it to help with visual consistency.

I would be deeply grateful if you opted into analytics.

$2,300 in API tokens…

Cheers!

Comments URL: [https://news.ycombinator.c … ⌘ Read more

@lyse@lyse.isobeef.org

Now I’m curious how movwin deals with that. ;-)

Focus handling? I hardly remember, lol. 😅 Did that 6 months ago and haven’t touched it since. Let’s see.

The core main loop gets keyboard/mouse events from curses. At this level, the main loop only knows about exactly one widget, so it passes the event to that widget (whatever that is, doesn’t matter – they all inherit from the Widget base class, it could be a Window, a WindowManager, or an Edit box directly).

The outermost widget is usually a WindowManager. It implements a few hotkeys of its own, like switching to another window. If none of those hotkeys match, it passes the event to the currently focused window.

Same story here: Window implements some hotkeys (like opening the menu bar). If none of those match, then … the magic happens.

Each Window acts as a focus manager. It can descend into its child widget hierarchy and collect all child widgets in a depth-first search. They are collected into a flat list. Each Window then has an attribute _focus_position, which is an index into that list. Pressing Tab or Shift+Tab increases or decreases that index and that allows you to select the next/previous focusable widget in the current window.

Eventually, Window passes the input event to the currently focused widget.

Usually on initialization, the application can ask a Window object to focus a certain widget. The file selection dialog does that, for example, because the “natural” focus order would be to focus the Edit box at the top of the window first – but that’s not what the user wants, the Table showing the list of files should be focused.

If no widget ever feels responsible for handling a certain input event, then there’s a global unhandled_input callback that the application can provide (same as in urwid).

I think that’s it.

Hm, that’s more complicated than I remembered, but apparently it works fine, because I completely forgot about this. 😅 All I did in the last few months was make new classes that inherit from Widget, like the new Table class or Edit or HexEdit or whatever, and if they want to get input events, then they must implement the methods input_key() or input_mouse().

Does this answer your question? 😅 (I admit that I didn’t exactly understand your scenario, so I just went ahead and rambled about my implementation. 😅)

A German Court Has Ruled That Google Is Liable for False Statements Generated by AI Overviews
The ruling holds that a company that designs, trains, operates, and manages an AI system must assume legal liability for any damages caused by the responses it generates. ⌘ Read more

Ask HN: Are most corporate SWE jobs performative?
The large companies I’ve worked at (including FAANG) seemed to thrive on kudos via performative actions. Like the majority of the team is doing useless stuff that management thinks is impressive while the couple all stars get the team closer to the goal.

Meanwhile, a lot of managers calendars are purely just 1:1s with devs on the team which clearly has very little value add to the team.

Anyone else notice this? Not sure if there’s a word for it, but it’s somewhat demoral … ⌘ Read more

The $16m Osborne Park hospital, the gym upstairs, and the battle over dropped weights
A state-of-the-art day hospital that specialises in spinal injections for pain management has taken a neighbouring gym to court after claiming throbbing music and the noise of dropped weights was impacting their business. ⌘ Read more

The final paper trail: How to make your executor’s job easier
Where there’s a will, there’s an executor – the person who manages your estate when you’ve died. Who do you choose for this important role, and how can you help smooth their way? ⌘ Read more

Castor: CERN Advanced STORage Manager
Article URL: https://castor.web.cern.ch/content/home.html

Comments URL: https://news.ycombinator.com/item?id=48403753

Points: 11

# Comments: 1 ⌘ Read more

Queensland demands assurances from scandal-plagued KPMG
The Queensland government, along with other states, wrote to the embattled firm to confirm contracts worth tens of millions of dollars were managed appropriately. ⌘ Read more

@movq@www.uninformativ.de Yes.

Maybe management should replace itself with AI…

Okay. I have lost the “battle” against “AI” at work and I will no longer try to “fight” any of it.

It is simply what people want. They want to use it. And that’s the end of it.

And why do they want it? Because it makes their job easier. And why is that? In very large parts, it’s because we have accumulated a metric fuckton of technical debt due to decades long mismanagement. We were (and are) operating in “emergency mode” all the time. There simply was no time to clean things up or to rethink designs. We always have to go with the cheapest and quickest solution. We are never ahead of things: Earlier this year, I started an initiative and wanted to tackle some issue that I could see coming. I was shut down because this wasn’t “urgent”. Very soon after, this exact thing became that exact problem – but now, there was no time anymore to do it properly because NOW it’s urgent, so, once again, we had to go with a quick and dirty solution.

It’s always like that and I had brought it up again and again. And now we have a huge spaghetti mess that hardly anyone understands anymore.

Nobody – except AI. It can still make some sense of this and, obviously, this is useful to people.

So, any argument I make against AI is completely pointless to begin with. I’m such a fool for not having seen this earlier.

The last argument I made today was: “Look, we already have so much technical debt and spaghetti systems, we really, really must clean this up. If we throw AI on top of this now, it’ll only get so much worse.” And once more, I was shut down. My intentions were “admirable”, but “there’s no time for that”.

Okay. Good luck with that. They’ll keep doing it this way. At some point, it’ll either explode entirely and some poor soul has to clean it up, or it’ll explode and they’ll have no other choice but to throw everything away and start from scratch – assuming they can still afford that.

In other words, none of this about AI, really, nor caused by it. Our department’s massive spike in AI usage is just a symptom of the underlying management issues. And since those aren’t being addressed, nothing will change and this whole mess will only get worse.

(I blame all this on management, because, well, that’s who’s to blame. I do not have a solution for it, though – and assigning blame without constructive criticism always sucks big time. I don’t like doing this. If you had put me into that particular management position, I wouldn’t have been able to solve any of this. The thing is, though, I’m not an expert on management and it isn’t my job – I’m just the “princess” who solves your technical issues.)

Vivid Sydney hopes drones will fly again next year. But they are hunting for a new operator
The search for an operations manager with “substantial” drone show experience was launched the day after dozens of drones descended into Darling Harbour. ⌘ Read more

Inmate escapes from SA pre-release centre
9News can reveal an inmate managed to escape the Adelaide Pre-Release Centre, allegedly sneaking back hours later with bottles of alcohol. ⌘ Read more

U.S. Midterms Have a Cyber Problem, but It’s Not at the Ballot Box
Article URL: https://blog.checkpoint.com/exposure-management/the-2026-u-s-midterms-have-a-cyber-problem-but-its-not-at-the-ballot-box/

Comments URL: https://news.ycombinator.com/item?id=48365237

Points: 4

# … ⌘ Read more

Shift from a Leader-Follower to a Leader-Leader Approach
Article URL: https://www.practicalengineering.management/p/shift-from-a-leader-follower-to-a

Comments URL: https://news.ycombinator.com/item?id=48351858

Points: 7

# Comments: 2 ⌘ Read more

Leaked audio reveals strata giant caught asking contractor for kickbacks
When a strata manager brazenly asked for a kickback to award a contract for work, the contractor was in shock. “I felt like I’d been struck across the face with a fish,” he said. ⌘ Read more

Leaked audio: “It’s a benefit to Ace itself”
Listen to the leaked recording of a corporate strata manager explicitly demanding a secret vendor kickback and offering to rig an owners corporation tender. ⌘ Read more

@movq@www.uninformativ.de I’m kind of flag you bring thi sup, because you simply can’t. You wouldn’t even be able to in an atypical neural network either (which is what ehse things are anyway). The problem here really isn’t the so-called “AI” (I wish we’d stop calling it AI), but the flawed usage(s) thereof. I believe I even stated earlier in this thread that sometimes it may not do what you expect, it’s “probabilistic” not “deterministic” – those pushing for greater use need to understand this, those not happy with the “push”, should educate the ignorant here (especailly managers pushing for weak, insecure and bad uses).

Major winemaker threatens to move business overseas if tax changes go through
The managing director of Taylors Wines in South Australia is threatening to move the business internationally in response to the federal government’s proposed tax changes. ⌘ Read more

White House ordering agencies to place its new app on all employees’ govt phones
Article URL: https://www.govexec.com/management/2026/05/white-house-ordering-agencies-place-its-new-app-all-employees-government-phones/413738/

Comments URL: [https://news.ycombinator.com/item?id=48244992](https://news.ycombin … ⌘ Read more

Supercharging Immune Cells May Help Control HIV Long-Term
CAR-T cell therapy is already a potent treatment for certain cancers. Now, a small study is showing early promise for managing HIV. ⌘ Read more

28-year-old woman poses as 16-year-old at New York high school
A woman who was approaching 30 managed to spend two weeks attending classes at the school. While reliving our school days is sadly not an option for m… ⌘ Read more

Use Gmail’s ‘Manage Subscriptions’ Tool to Cut Down on Inbox Clutter
Find and remove newsletter subscriptions more easily using Gmail’s built-in tools for organizing bulk emails. ⌘ Read more

When we manage to deliver on time but literally at the last minute ⌘ Read more

When I finally manage to fix a bug after pulling an all-nighter ⌘ Read more

@movq@www.uninformativ.de LOL. I think I get the idea. I am concerned about AI too. Managers starting with “I don’t know anything about this, but here is what says”. Infuriating.

I came across this one today, here is a gift link: https://www.nytimes.com/2026/04/15/opinion/art-artificial-intelligence.html?unlocked_article_code=1.bFA.XNiu.ZukFfdNl3Al1&smid=nytcore-ios-share

When the project manager says “we’ll see that in v2” for everything that’s complicated ⌘ Read more

Major fire destroys huge toilet paper supply warehouse in California
An unexpected disaster has managed to destroy a 1.2 million-square-foot toilet roll storage facility. Eyebrows were raised along the West Coast this w… ⌘ Read more

Escaped capybara gives search teams the runaround in England
The evasive mammal managed to escape its handlers at Marwell Zoo last week and has been on the run ever since. An unexpected creature is currently on … ⌘ Read more

When the manager asks me to build a dashboard to track the team’s productivity ⌘ Read more

15-year-old steals bus, then drives 80 miles to pick up his girlfriend
The teenager had seemingly managed to take the bus without anyone realizing for quite some time. According to reports, the bizarre incident began on M… ⌘ Read more

When I manage to fix the bug the team had been stuck on for days ⌘ Read more

When my pair tells me they managed to get us extra time for our delivery ⌘ Read more

When I manage to fix a bug without using Google or an AI ⌘ Read more

When I list the technologies we use on our new project to the marketing manager ⌘ Read more

When the manager tells me the bug is top priority even though it’s been around for 6 months ⌘ Read more

When I manage to reproduce the bug that was reported to me ⌘ Read more

When the manager asks for a status update even though they skipped the daily that just ended ⌘ Read more

What a beautiful, beautiful 0°C Sunday arvo and evening! The weather forecast delayed the snow by the minute. An hour or so after it finally started very, very lightly, I headed off for the woods to check out the lake again. Unfortunately, with the fresh snow layer, the crazy wild surface texture of the ice sheet wasn’t visible anymore. But it brought some other nice views and photo opportunities.

I initially thought that I just go for a quick turn. However, with the snowfall a wee bit increasing I was hooked and kept going. Visibility was poor, but the snow blankets just looked too stunning. The road surfaces were quite slippery, so I often just walked alongside the pathways. On downhill slopes I had some good fun sliding down the road on my feet. With varying success. Luckily, I managed not to fall.

On the summit of the mountain the twigs had those absolutely magnificently looking windblown crystal coverings. Awwwwwww! They never get old. It was already getting dark, so the camera was tired and wanted to sleep. The snow program then made use of the flash and I’m quite pleased with how these shots turned out.

Two deer crossed the road in front of me and ran into the woods, that was sight for sore eyes. Although I felt bad that they had to flee from me in this white terrain. By the time I got home, the snow had accumulated around eight centimeters in height, even in town down in the valley. Walking on this fresh snow is just amazing. And I love the sound it makes. Today, the snow consistency must have been just right, because the crushing sound was really loud.

I cannot recall that I had frozen hair and beard before, but today, there was a thick ice buildup. In case I had, it was definitely never this much. Felt really cool.

Enough of this preliminary skirmishing, there ya go: https://lyse.isobeef.org/waldspaziergang-2026-01-25/

When the request isn’t exactly clear but I still manage to deliver what was expected ⌘ Read more

When the managers are impressed by something I threw together at the last minute ⌘ Read more

Oldest known cremation in Africa poses 9,500-year-old mystery
How did Stone-Age hunter-gatherers manage to build a fire capable of cremating human remains ? Jessica C. Thompson, Elizabeth Sawchuk and Jessica Cere… ⌘ Read more

Okay, I had heard of “River” before but I was not aware of this:

https://codeberg.org/river/river

River defers all window management policy to a separate window manager implementing the river-window-management-v1 protocol. This includes window position/size, pointer/keyboard bindings, focus management, window decorations, desktop shell graphics, and more.

This sounds promising and it follows the old X11 model. River does all the nasty Wayland work and I can make just the WM? 🤔🤯

@movq@www.uninformativ.de Aha! Well, happy hacking. A tiling window manager seems to be good fun. :-)

Workers rehired as new managers revive Dicky Bill salad farms
About 160 staff lost their jobs when Dicky Bill collapsed owing up to $10 million. Two separate businesses have stepped in to take over, but not all operations will reopen. ⌘ Read more

@movq@www.uninformativ.de I’ve managed to bring a simple “Hello World!” in mu (µ) (at least on macOS / Darwin / ARM64) down to ~86KB (previously ~146KB) 🥳

Water thieves forced to pay $558,000
Jindalee Road Wines and its former manager have been penalised $558,000 for illegally tapping into an irrigation pipeline and stealing water. ⌘ Read more

Went to Ba Na Hills today, but honestly it was so cold and misery i couldn’t take very good photos 🤣 Here’s a few shots i managed!

I’m contemplating the idea of switching my activity pub instance from Gootosocial to a Pleroma one. While GTS is kinda cute (lightweight and easy to manage) of a software, the inability to fetch/scroll through people’s past toots when visiting a profile or having access to a federated timeline and a proper search functionality …etc felt like handicap for the past N months.

When I manage to dodge the blocking bug during my demo ⌘ Read more

When the manager says we’re “doing agile” and I haven’t seen a single sprint review in 3 months ⌘ Read more

17, 21, and 22 are my favourites. Thank you for sharing! On 17, the pulley might be dangerously hanging, but if you manage to make it work, you will have a couple of nails to use! :-D

@bender@twtxt.net i am split between registrars .. isnic is only managed by the country registrar. the others i have at regular reseller

@bender@twtxt.net No plus-aliases, just aliases. The mailserver runs on my OpenBSB box and is managed using BundleWrap (we use that at work), so to create a new alias, I push a new BundleWrap config to the server.

Somebody managed to piss @prologic@twtxt.net off, and it looks like he took twtxt.net down with it. Oh dear…

I’m building a service that lets you:

create and manage disposable, brandable email aliases so you can track leaks, forward important messages, and keep your real inbox clean.

I’ve just finishing building it for the most part, and have cut a v0.1.0 release. It’s currently closed source (to be decided later) and now open to beta testers. cc @bender@twtxt.net 🙏 I fully intend to monetize and offer this as a paid service in teh coming weeks/months, but beta/invite-only testers and early adopters/users first 🤟

@zvava@twtxt.net Late happy birthday! :-)

Cool, your website indeed mostly works even in w3m and ELinks. Sending notifications in the about page is out of question, since it requires JS. Apart from that, this is very good, keep it up!

Not sure how I can get the deskop look and feel working in Firefox, but since I’m a tiling window manager user, I prefer linear webpages anyway. :-)

It happened.

Management asked me if I’m using enough AI and what I’m doing to learn more about it.

When the project manager tells me “it’s just a quick little fix” ⌘ Read more

Debian Adding “Hard Dependency” on Rust, May Abandon Some PC Architectures
APT, Debian’s package manager also used by Ubuntu, to have a hard Rust requirement. ⌘ Read more

@movq@www.uninformativ.de Yeah, give it a shot. At worst you know that you have to continue your quest. :-)

Fun fact, during a semester break I was actually a little bored, so I just started reading the Qt documentation. I didn’t plan on using Qt for anything, though. I only looked at the docs because they were on my bucket list for some reason. Qt was probably recommended to me and coming from KDE myself, that was motivation enough to look at the docs just for fun.

The more I read, the more hooked I got. The documentation was extremely well written, something I’ve never seen before. The structure was very well thought out and I got the impression that I understood what the people thought when they actually designed Qt.

A few days in I decided to actually give it a real try. Having never done anything in C++ before, I quickly realized that this endeavor won’t succeed. I simply couldn’t get it going. But I found the Qt bindings for Python, so that was a new boost. And quickly after, I discovered that there were even KDE bindings for Python in my package manager, so I immediately switched to them as that integrated into my KDE desktop even nicer.

I used the Python KDE bindings for one larger project, a planning software for a summer camp that we used several years. It’s main feature was to see who is available to do an activity. In the past, that was done on a large sheet of paper, but people got assigned two activities at the same time or weren’t assigned at all. So, by showing people in yellow (free), green (one activity assigned) and red (overbooked), this sped up and improved the planning process.

Another core feature was to generate personalized time tables (just like back in school) and a dedicated view for the morning meeting on site.

It was extended over the years with all sorts of stuff. E.g. I then implemented a warning if all the custodians of an activitiy with kids were underage to satisfy new the guidelines that there should be somebody of age.

Just before the pandemic I started to even add support for personalized live views on phones or tablets during the planning process (with web sockets, though). This way, people could see their own schedule or independently check at which day an activity takes place etc. For these side quests, they don’t have to check the large matrix on the projector. But the project died there.

Here’s a screenshot from one of the main views:

Image

This Python+Qt rewrite replaced and improved the Java+Swing predecessor.

@movq@www.uninformativ.de Uh, that actually looks not that terrible. Somehow, I remember Swing GUIs being way uglier.

As for Visual Basic, I only had to use VBA once in my life. That was in the beginning of my career when I inherited a project from a leaving coworker. Fuck me, was that awful. Just alone the damn compiler error dialog box popping up in my face all the time while editing and the compiler already trying to parse the unfinished and hence of course uncompilable code. Boy, that left a lasting impression on me. I ported everything to Java very quickly. Luckily, the code base wasn’t all that large at that point in time. I had to add a bunch of new features after that, so I was very glad that I convinced my workmate/project manager to do that first. We didn’t even need a GUI, the button in Excel was transformed to a command line program that just generated the large file.

But I cannot comment on the VB GUI designer, I never used that. Your screenshot looks very similar to the Delphi one, though. Only towards the end of my Delphi days I found out about the possibility to make the widgets snap to window edges and corners (I don’t remember how that was called), so that resizing the windows was actually possible without messing up their entire contents.

Switching to Linux, Delphi wasn’t an option anymore. For some reason I couldn’t use Kylix. Maybe it was already dead by the time I changed OSes. Or I couldn’t get it to run. I just don’t remember. I just recall that the unavailability of Delphi was the reason it took me a while to actually settle on Linux. I then fully switched to Java. The GridBagLayout was my absolutely favorite Swing layout manager. I reckon I used it 98% of the time, because it was so powerful and made the windows resize properly, just as I had learned to do in Delphi shortly before.

Up until discovering Swing, I used Java’s AWT for a short amount of time. That was very limited I think and I hit the limits fairly quickly. Later at uni, we had one project making use of SWT. Didn’t convince me either. I could be wrong, but I think there was also a SWT GUI designer plugin for Eclipse. If there really was, that one wasn’t in the same street as Delphi’s (there must be a reason I forgot about it ;-)).

@lyse@lyse.isobeef.org maybe @prologic@twtxt.net managed to mess things up—we should be used to this already, right? LOL—as the meets are always on Saturdays, as early as 06:00 EDT, or whereabouts, never on a Sunday.

You want me to submit a reply with “I probably won’t show up”?

I LOLed IRL! 🤣

When we manage to get the app running on limited hardware ⌘ Read more

@movq@www.uninformativ.de he sure does! LOL. It is more like incomprehensible stuff that comes out. Sometimes I manage to get what he was trying to say, but more often than not I have no idea. 🤣

When I manage to sneak a recursive function into my code ⌘ Read more

From teen star to manager at 33 - Wilshere’s journey
He was an Arsenal wonderkid and an England star - now Jack Wilshere is taking his first steps in management at League One side Luton aged just 33. ⌘ Read more

Ex-England midfielder Wilshere named Luton manager
Jack Wilshere takes charge of League One side Luton Town - the former Arsenal and England midfielder’s first full-time managerial role. ⌘ Read more

Building multi-step login forms that work well with password managers
Comments ⌘ Read more

I’d like to speak to the Bellcore ManaGeR
Comments ⌘ Read more

Gerrard rejects chance to return as Rangers boss
Steven Gerrard has turned down the chance to return to Rangers for a second stint as manager. ⌘ Read more

Captain, player, manager, Mister, number one - Davids at Barnet
BBC Sport remembers Edgar Davids’ 15 months as Barnet player-manager in League Two and the Conference. ⌘ Read more

It happened.

“Can you help me debug this program? I vibe coded it and I have no idea what’s going on. I had no choice – learning this new language and frameworks would have taken ages, and I have severe time constraints.”

Did I say “no”? Of course not, I’m a “nice guy”. So I’m at fault as well, because I endorsed this whole thing. The other guy is also guilty, because he didn’t communicate clearly to his boss what can be done and how much time it takes. And the boss and his bosses are guilty a lot, because they’re all pushing for “AI”.

The end result is garbage software.

This particular project is still relatively small, so it might be okay at the moment. But normalizing this will yield nothing but garbage. And actually, especially if this small project works out fine, this contributes to the shittiness because management will interpret this as “hey, AI works”, so they will keep asking for it in future projects.

How utterly frustrating. This is not what I want to do every day from now on.

Amorim needs three years at Man Utd - Ratcliffe
Manchester United co-owner Sir Jim Ratcliffe says manager Ruben Amorim needs three years to prove he is a “great” coach. ⌘ Read more

Better profile management coming to Firefox
Firefox has long had support for multiple profiles
to store personal information such as bookmarks, passwords, and user
preferences. However, Firefox did not make profiles particularly
discoverable or easy to manage. That is about to change; Mozilla has
announced
that it is launching a profile management feature that will make it
easier to … ⌘ Read more

How England’s ‘Golden Generation’ describe the reasons why they failed
Tactical shortcomings, misguided managers or stellar opponents - why do England’s so-called ‘Golden Generation’ think they failed to deliver success? ⌘ Read more

Police say proposed Opera House march has ‘disaster written all over it’
A senior NSW Police officer has expressed cynicism that a crowd of tens of thousands could be managed in a staggered manner. ⌘ Read more

Managing Kubernetes Workloads Using the App of Apps Pattern in ArgoCD-2
Managing a cloud native infrastructure at scale is no longer just about deploying single applications – it’s about organizing environments, defining clear boundaries and keeping everything version-controlled, consistent, automated and easily managed within a simple and… ⌘ Read more

U-Boot v2025.10 released
Version 2025.10 of the U-Boot boot loader
has been released with new features, including Python tooling improvements,
cleanups for implicit header inclusions, better support for numerous Arm
platforms, support for new RISC-V platforms, better documentation, and
more. Maintainer Tom Rini also reports on some project news:

As I mentioned with the v2025.07
release, I was looking for a few people to step up and help with the
overall organization and management of the project. To that … ⌘ Read more

This GP says fees will go up at his clinic when bulk-billing incentives come in
GPs are managing conditions typically handled by specialists due to high costs and only 12 per cent can afford to bulk-bill all patients, according to an industry survey. ⌘ Read more

Waste management workers have gone from hero to zero in the public’s eyes since the pandemic, UK research says
Dustmen and road sweepers have gone from hero to zero in the public’s eyes since the end of the COVID pandemic, new research says. ⌘ Read more