M5Stack Expands Offline LLM Lineup with Ethernet-Enabled Kit
M5Stack has launched the Module LLM Kit, combining the Module LLM and Module13.2 LLM Mate for offline AI inference and data communication. It supports applications like voice assistants, text-to-speech conversion, smart home control, and more. This module operates using the AiXin AX630C SoC processor, also found in other M5Stack products like the LLM630 Compute Kit […] ⌘ Read more

LILYGO T-Deck Pro Offers E-Paper Display with Configurable 4G and Voice Options
LILYGO has introduced the T-Deck Pro, an open-source development board with a built-in keyboard and a 3.1-inch e-paper touchscreen. Combining sensor integration with touchscreen functionality, it can be applied to various projects in areas like IoT and portable devices. The board features the ESP32-S3FN16R8 dual-core LX7 microprocessor, similar to the T-Deck Plus released in December. … ⌘ Read more

Firefly Automation Controller Adds Industrial Control Capabilities to Raspberry Pi Compute Module
CrowdSupply recently featured the Firefly Automation Controller, a platform combining Raspberry Pi Compute Module-compatible modules with the STM32H7 microcontroller for industrial applications. With IO-Link Class B channels, it supports communication and control of sensors and actuators. The STM32H7 microcontroller, running at up to 480 MHz, manages … ⌘ Read more

Raspberry Pi PoE+ Injector Leverages Power-Over-Ethernet for Remote Deployments
This month, Raspberry Pi launched a device capable of powering its single-board computers over Power-over-Ethernet. The Raspberry Pi PoE+ Injector enables both power and data to be transmitted through a single Ethernet cable, simplifying network infrastructure for projects deployed in remote or difficult-to-access locations. Compatible with devices conforming to IEEE 802.3af and 802.3at … ⌘ Read more

Variscite Expands SoM Lineup with VAR-SOM-AM62P Featuring TI Sitara AM62Px Processor
Variscite has released the VAR-SOM-AM62P, a new System on Module based on the Texas Instruments Sitara AM62Px processor. This module expands the VAR-SOM product line with enhanced multimedia functionality while maintaining a focus on cost efficiency. The module integrates a quad-core Cortex-A53 processor running at 1.4GHz, along with an 800MHz Cortex-R5F real-time co-processo … ⌘ Read more

FET536-C SoM Carrier with High-Speed Interfaces and GPIO Expansion
The FET536-C System on Module, based on the Allwinner T536 processor, is designed for applications that require reliable performance and flexible connectivity. It is intended for use in fields such as data concentrators, DTUs, EV charging systems, transportation, robotics, and industrial control. The module integrates a 1.6GHz quad-core Cortex-A55 CPU and a 64-bit Xuantie E907 […] ⌘ Read more

T-Display K230 Combines RISC-V Processing with LoRa, Wi-Fi, and AMOLED Display
The LILYGO T-Display K230 is a compact development board targeting IoT and embedded system applications. It features the Kendryte K230 system-on-chip, which includes a dual-core 64-bit RISC-V processor and dedicated units for AI acceleration, graphics rendering, and multimedia processing. The K230 SoC includes two CPU cores: CPU1 operates at 1.6 GHz, while CPU0 runs at […] ⌘ Read more

RPI Image Gen Introduces Custom Raspberry Pi Image Creation
The Raspberry Pi team has introduced rpi image gen, a new tool for creating custom software images with detailed control over configuration. It is designed for embedded systems, industrial applications, and personalized projects. rpi image gen is an alternative to the existing pi gen tool, which is used to produce the official Raspberry Pi OS […] ⌘ Read more

M5Stamp PLC Controller with Opto-Isolated Inputs, Relays, PWR CAN, and RS485
The M5Stamp PLC Controller, built on the StampS3A module, is a compact programmable logic controller designed for industrial automation and remote monitoring. With wireless connectivity, versatile I/O, and industrial communication support, it fits applications such as smart manufacturing and distributed control. The StamPLC leverages the StampS3A, which incorporates an ESP32-S3FN8 microcontroll … ⌘ Read more

NXP’s FRDM i.MX 91 Board Provides Low-Power Solution for Linux-Based IoT Systems
Following the release of the FRDM i.MX 93 board, NXP has launched the FRDM i.MX 91 development board, a compact platform based on the i.MX 91 applications processor. It is intended for early-stage development and evaluation of industrial and IoT systems that require basic Linux support, integrated connectivity, and hardware-level security. The board features a […] ⌘ Read more

SOMDEVICES Expands SoM Lineup with µSMARC RZ/V2N for AI and Vision Applications
SOMDEVICES has introduced the µSMARC RZ/V2N, a System-on-Module based on the Renesas RZ/V2N processor. Designed for AI-driven machine learning, vision applications, and industrial automation, this module delivers high computational performance in a compact form factor. This module features the same Renesas processor as the V2N SOM by IMDT, which was covered earlier this month. Bui … ⌘ Read more

New Smartwatches Support PebbleOS with Long Battery Life and E-Paper Displays
Two new smartwatches running open-source PebbleOS have been introduced: Core 2 Duo and Core Time 2. These watches maintain compatibility with thousands of existing Pebble apps while incorporating modern hardware updates. Core 2 Duo is an updated version of the Pebble 2, featuring a 1.26-inch black-and-white e-paper display and a polycarbonate frame in White or […] ⌘ Read more

RDK X5 Development Kit Featuring HDMI, MIPI CSI, and Gigabit Ethernet
The RDK X5 is a development kit designed for intelligent computing and robotics. It features a form factor similar to the Raspberry Pi single board computer but is powered by the 10 TOPS Sunrise 5 processor. The RDK X5 includes an octa-core Cortex-A55 CPU running at 1.5 GHz, a dedicated BPU with 10 TOPS of […] ⌘ Read more

(Updated) Olimex’s Open Source iMX8MPlus SOM & EVB for Industrial, ML, and Vision Applications with 2.3 TOPS NPU
Olimex’s Open Source iMX8MPlus SOM & EVB for Industrial, ML, and Vision Applications with 2.3 TOPS NPU ⌘ Read more

BPI R4 Lite is in Development with Wi-Fi 7 and High Speed Networking
The Banana Pi team is developing a new router board, the BPI-R4 Lite, which is expected to support Wi-Fi 7 and high-speed networking. The design is based on the MediaTek MT7987A quad-core Arm Cortex-A53 processor and includes multiple connectivity and expansion options. Current design plans include 2GB of DDR4 memory, with support for up to […] ⌘ Read more

Sipeed Previews Compact, Low-Cost NanoCluster for Multi-SOM Computing
The NanoCluster is a compact computing platform designed for multi-SOM configurations, offering a balance between size and functionality. It supports up to seven system-on-modules, including the LM3H, CM4, CM5, and M4N, making it adaptable for various applications requiring distributed computing. With dimensions of 85x56mm, the board is significantly smaller than a standard mini-ITX board, occupying […] ⌘ Read more

Industrial Embedded Computing with FET3506J S SoM and Linux Compatibility
The FET3506J-S System on Module is designed for industrial environments that require stable performance and a range of connectivity options. It supports Linux and various industrial interfaces, making it adaptable to applications in automation, healthcare, power systems, and communication technologies. The FET3506J-S features the Rockchip RK3506J processor with a triple-core Cortex-A7 architecture … ⌘ Read more

Comet GL-RM1 Enables Remote Control with 2K Video Resolution
Comet (GL-RM1) is a hardware-based remote KVM solution for remote computer access and control. Its open-source design enables hardware-level interaction, making it useful for remote work, IT maintenance, and server management. It allows full control over offline computers, including BIOS access, troubleshooting, and boot failure recovery. The device features a quad-core 1.5GHz processor, 1GB DDR3 […] ⌘ Read more

Vantron Introduces the VT USB AH 8108 Wi-Fi HaLow Dongle Featuring Morse Micro MM8108
Vantron has introduced the VT-USB-AH-8108 Wi-Fi HaLow Dongle, a compact connectivity solution powered by Morse Micro’s MM8108 chipset. The device supports long-range, low-power wireless communication through a plug-and-play USB interface. Wi-Fi HaLow technology is being adopted for industrial IoT applications, smart cities, and enterprise networks. The VT-USB-AH-8108 is des … ⌘ Read more

UNIHIKER K10 is an ESP32-S3 based platform with TinyML and built-in sensors
The UNIHIKER K10 is an AI learning device designed for education, integrating features for artificial intelligence, machine learning, and IoT applications. It includes a 2.8″ color screen, Wi-Fi, Bluetooth, a camera, microphone, speaker, RGB light, and multiple sensors. The device features an ESP32-S3 Xtensa LX7 microcontroller with 512KB SRAM and 16MB flash storage. It supports […] ⌘ Read more

IMDT V2N SBC: A Vision-AI Computing Platform with Dual MIPI CSI and Renesas RZ/V2N Processor
IMDT has introduced its latest System-on-Module and Single-Board Computer, both powered by the Renesas RZ/V2N processor. These new platforms are designed to deliver cost-effective, high-performance AI computing at the edge, supporting applications in robotics, smart cities, industrial automation, IoT, and smart retail. The core of both the SOM and SBC is the Re … ⌘ Read more

PicoCalc Brings Classic Computing to ClockworkPi v2.0 with Raspberry Pi Pico
The PicoCalc is a compact computing platform designed to recreate the experience of early personal computers. Running on 260KB of memory, it allows users to code in BASIC, explore Lisp, interact with a UNIX-like environment, and run retro games and digital music. Its modular and open-source design makes it adaptable for various applications. Built on […] ⌘ Read more

Texas Instruments Introduces MSPM0C1104 as the Smallest Available Microcontroller
Texas Instruments has introduced the MSPM0C1104, which it describes as the world’s smallest microcontroller, expanding its MSPM0 MCU portfolio. Measuring only 1.38mm², this wafer chip-scale package MCU is 38% smaller than existing alternatives. It is designed for applications where board space is limited, such as medical wearables and personal electronics, while maintaining functio … ⌘ Read more

Radxa CM3J with Built-in Wi-Fi 5 and Bluetooth 5.0 for Industrial Applications
The Radxa CM3J is an industrial-grade compute module built around the Rockchip RK3568J SoC. This compact module integrates a CPU, PMU, LPDDR4X, eMMC, and wireless connectivity options such as Wi-Fi 5 and Bluetooth 5.0 in a 55mm x 40mm form factor. The Radxa CM3J is powered by the Rockchip RK3568J, a quad-core Cortex-A55 64-bit SoC […] ⌘ Read more

Expanding Open-Source Support for MediaTek’s Genio IoT Platforms with Collabora
MediaTek continues to strengthen upstream support for its Genio IoT platforms through its collaboration with Collabora. Following the initial efforts to integrate Genio EVKs into the open-source ecosystem, recent updates bring improvements to the Linux kernel, Debian-based images, and automated testing frameworks. These enhancements ensure broader compatibility and long-term support for … ⌘ Read more

Linux Micro Development Board Now Features 8GB eMMC and PoE Support
The Luckfox Lyra Ultra is the latest addition to the Lyra series, featuring the RK3506B processor with a tri-core ARM Cortex-A7 and Cortex-M0 architecture. With its expanded storage, additional memory, built-in wireless connectivity in the Ultra W variant, and PoE support, the Lyra Ultra builds on previous models while maintaining compatibility within the Lyra series. […] ⌘ Read more

OrangePi RV2: A Cost-Effective RISC-V Board with M.2 2280 Slot and Dual Gigabit Ethernet
OrangePi has launched another RISC-V development board following the release of the Orange Pi RV in 2024. This new SBC, OrangePi RV2, is powered by the Ky X1 octa-core RISC-V AI CPU, delivering 2TOPS of AI computing power for applications in machine learning, robotics, and embedded systems. Unlike the original Orange Pi RV, which was […] ⌘ Read more

M5Stack Cardputer v1.1 Brings Upgraded Microcontroller and Improved Keyboard
M5Stack has released Cardputer v1.1, an upgraded version of its compact computing platform. The latest version introduces the StampS3A microcontroller, an improved antenna, and a more responsive keyboard, enhancing stability and usability. Additional refinements include optimized power consumption and better RGB LED control, improving overall efficiency. Cardputer v1.1 features the StampS3A, … ⌘ Read more

LILYGO Upgrades T-Watch S3 with GPS and a 940mAh Battery
LILYGO has introduced the T-Watch S3 Plus, an upgraded version of its ESP32-based smartwatch. While maintaining the open-source flexibility of its predecessor, this new model adds GPS positioning, a larger 940mAh battery, and refined hardware features. It supports Arduino-IDE and VS Code making it an adaptable platform for developers and hobbyists. The T-Watch S3 Plus […] ⌘ Read more

RK3566 Credit Card-Sized SBC with M.2 Expansion and 4K Video Support
The RK3566 Single Board Computer is designed for a range of applications, combining processing power with multiple connectivity options. Built with an 8-layer PCB design and featuring a compact form factor, it is powered by a quad-core Cortex-A55 processor and includes an M.2 2242 slot for expansion. The SBC features the Rockchip RK3566, a quad-core […] ⌘ Read more

Torizon and Texas Instruments Collaborate on Cybersecurity Compliance for Embedded Systems
Torizon and Texas Instruments have announced a collaboration aimed at simplifying cybersecurity compliance and development for industrial and medical embedded systems. The partnership integrates Torizon’s software platform with TI’s Arm-based, Linux-capable processors, addressing increasing security requirements such as those outlined in the EU Cyber Resilience Ac … ⌘ Read more

MayQueen Introduces a 2.13″ Four Color E-Paper Display for Embedded Applications
MayQueen has introduced the PIXPAPER-213-C, a 2.13-inch prototype electronic paper display developed with Triangle Alien Studio. Featuring a four-color display and an SPI interface, it is designed for low-power, high-contrast embedded applications. The PIXPAPER-213-C supports black, white, yellow, and red colors with a resolution of 250×122 pixels and a density of 130 DPI. The active … ⌘ Read more

Adafruit Metro RP2350 is Available for $24.95 with Arduino Form Factor Compatibility
The Adafruit Metro RP2350 is designed for projects that require Arduino form-factor compatibility, multiple GPIO options, and debugging capabilities. Built around the Raspberry Pi RP2350 microcontroller, this board provides various connectivity features and programming support, making it a flexible choice for embedded development. As its name suggests, the Metro RP2350 feature … ⌘ Read more

ADLINK and LIPS Introduce 3D Perception DevKit for Autonomous Mobile Robots
ADLINK Technology and LIPS have introduced a perception solution for autonomous mobile robots. The LIPSAMR Perception DevKit integrates ADLINK’s DLAP-411-Orin platform with LIPSedge AE Active Stereo 3D cameras, providing enhanced 3D vision with a wider field of view and higher resolution than LiDAR. Built on NVIDIA Isaac Perceptor, it is designed for smart manufacturing and […] ⌘ Read more

(Updated) Olimex Launches POEv3 Add-On for ESP32-P4 Development Board
Espressif Systems announced the ESP32-P4 over a year ago. While the chip is not yet available for retail, a prototype development board featuring the chip was recently showcased by Olimex. This board includes multiple interfaces, such as an Ethernet connector and a camera connector, demonstrating its versatile capabilities. The ESP32-P4, initially announced last year, features […] ⌘ Read more

ASUS NUC 15 Pro+ Starts at $810 with Intel Core Ultra 9 285H
ASUS has just provided pricing details for the ASUS NUC 15 Pro+, a compact computing system powered by Intel Core Ultra Processors (Series 2), offering up to 99 TOPS of AI acceleration and an 18% increase in performance compared to the previous generation.   As of now, the product page indicates that the ASUS NUC […] ⌘ Read more

X8390ABV4 Development Board with MediaTek Genio 510/700 and PCIe Expansion
Youyeetoo recently listed a motherboard based on the MediaTek Genio 510/700 platform, built around the MT8390 and MT8370 processors. The X8390ABV4 MediaTek Development Board includes Gigabit Ethernet, dual-band Wi-Fi, and multiple multimedia interfaces, making it applicable for AI and IoT applications. The MT8390 features an octa-core processor with two ARM Cortex-A78 cores clocked at 2.2GHz [… … ⌘ Read more

PiKVM Switch Multiport Extender: Manage Up to 20 Systems from a Single PiKVM
The PiKVM Switch Multiport Extender expands a single PiKVM unit’s control to multiple computers through a web-based interface. Each unit supports four systems, with the option to daisy-chain up to five extenders for managing up to twenty targets. It integrates with the PiKVM interface, enabling centralized control and real-time monitoring of system connections and ATX […] ⌘ Read more

T-Connect-Pro: An ESP32-S3 Based Industrial Communication Module
LILYGO recently introduced the T-Connect-Pro, a communication module built around the ESP32-S3-R8 microcontroller. It consists of three stacked circuit boards and integrates multiple interfaces, including CAN, RS485, RS232, Ethernet, and LoRa. Designed for long-distance data transmission, the module includes a TFT LCD screen for configuration and monitoring. The core of the T-Connect-Pro is the ESP32-S3-R8 […] ⌘ Read more

Kiwi SOM Featuring Wi-Fi 7 Qualcomm IPQ-9570 Dual USXGMII and PCIe Expansion
Following the development of its Wi-Fi 6 System-on-Modules, Mango and Cherry, 8DEVICES has introduced Kiwi, a Wi-Fi 7 SOM based on the Qualcomm IPQ-9570 network processor. The Kiwi SOM runs Linux OpenWRT, providing flexibility for various embedded networking applications. This module features a quad-core Cortex-A73 CPU running at 2.2 GHz with a 1 MB L2 […] ⌘ Read more

Haasoscope Pro Open Source USB Oscilloscope with 2 GHz Bandwidth and 3.2 GS/s Sampling
Crowd Supply recently launched Haasoscope Pro, an upgraded version of the original open-source USB oscilloscope introduced in 2018. It features a 2 GHz bandwidth, 12-bit resolution, and a 3.2 GS/s sampling rate, providing an open-hardware solution for high-speed signal analysis. According to the product page, oscilloscopes with bandwidths above 1 GHz are typically designe … ⌘ Read more

ameriDroid Opens Preorders for VPN Server with WireGuard and DietPi
The VPN Server by ameriDroid is a pre-configured device for secure remote access to home and small office networks. Built on the ODROID-C4, it runs a lightweight Linux-based system with WireGuard for encrypted VPN connections and minimal setup. The device is based on the ODROID-C4, a single-board computer released in early 2020 by Hardkernel, featuring […] ⌘ Read more

DietPi Late February 2025 Update (Version 9.11)
The late February update of DietPi v9.11 introduces support for Pi-hole v6 while improving system stability, first-boot automation, and network reliability during initial setup, along with resolving kernel selection issues on Raspberry Pi.       DietPi: DietPi is a lightweight, optimized Linux-based operating system designed for single-board computers and embedded systems. It provides an […] ⌘ Read more

Raspberry Pi-Like Board Incorporates RK3568 CPU, GbE Port, and M.2 2242 Slot
Graperain’s RK3568 single board computer is a compact platform for embedded applications, powered by a quad-core Cortex-A55 CPU at 2.0GHz. It supports Android 11, Linux, Ubuntu, and Debian, features an ARM G52 2EE GPU for 4K video decoding, and offers versatile connectivity for industrial, consumer, and commercial use.   The Rockchip RK3568 processor is built […] ⌘ Read more

(Updated) Spitz Plus GL-X2000 is an Upcoming Wi-Fi 6 and 4G LTE CAT 12 Router
The Spitz Plus GL-X2000 is a 4G LTE Wi-Fi 6 router designed to deliver reliable connectivity for remote work, travel, and rural internet access. It supports advanced network features like Multi-WAN, Failover, and Load Balancing, enhancing connection stability and ensuring dependable performance. The router is powered by a Qualcomm dual-core processor running at 1 GHz, […] ⌘ Read more

(Updated) SolidRun HummingBoard i.MX8M IIOT SBC with NVMe, RS232, RS485, and LTE Support
SolidRun HummingBoard i.MX8M IIOT SBC with NVMe, RS232, RS485, and LTE Support ⌘ Read more

SpacemiT X60 RISC V Processor Enables AI and High Speed Storage in Bit Brick K1 Embedded Board
The Bit-Brick K1 is a single-board computer designed for industrial and edge computing applications. It features the SpacemiT Key Stone K1, an ultra-low-power octa-core RISC-V system-on-chip with SpacemiT Daoyi AI acceleration. Built on the RISC-V 64GCVB architecture and RVA22 standard, the processor delivers 2.0TOPS of AI computing power using customized … ⌘ Read more

Silicon Labs-Based XIAO MG24 Series Expands with New Pre-Soldered and Multi-Pack Versions
Seeed Studio has expanded its XIAO MG24 and XIAO MG24 Sense development board lineup with new variants, including pre-soldered versions and 3PCS packs. These additions provide more flexibility for developers working on IoT and Matter-based projects, streamlining prototyping and small-scale production. The XIAO MG24 and XIAO MG24 Sense are now available in 3PCS packs … ⌘ Read more

ADLINK Introduces OSM MTK510 Featuring MediaTek Genio 510 COM with Yocto Linux Compatibility
ADLINK Technology Inc. has introduced the OSM-MTK510, a compact and rugged computer-on-module based on the MediaTek Genio 510 platform. Designed for efficiency, the OSM-MTK510 supports AI workloads while maintaining power efficiency and long-term availability for industrial and embedded applications. The OSM-MTK510 features the MediaTek Genio 510, a 6-core pro … ⌘ Read more

Ezurio Veda SL917 Expands Industrial IoT Connectivity with Wi-Fi 6 and Bluetooth LE
The Veda SL917, developed by Ezurio and based on the Silicon Labs SiWx917 chipset, is a low-power wireless module designed for industrial IoT applications. It provides connectivity options, including Wi-Fi 6, Bluetooth Low Energy 5.4, and support for Matter and IP networking, providing secure cloud connectivity and efficient power management. This device supports OFDMA, MU-MIMO … ⌘ Read more

OpenWrt One AP 24 XY Brings Open Source Networking to a Custom Router
The OpenWrt One/AP-24.XY is a router board based on the MediaTek MT7981B (Filogic 820) SoC, combined with the MediaTek MT7976C dual-band Wi-Fi 6 chipset. Developed in collaboration with Banana Pi, the OpenWrt One is the first official hardware platform supported by the OpenWrt open-source community, designed for OpenWrt learning, IoT applications, and general networking use […] ⌘ Read more

OpenMV Introduces the GENX320 Camera Module for Event-Based Vision
OpenMV has introduced the Prophesee GenX320 camera module, bringing event-based vision sensing to its embedded platform. Unlike traditional image sensors that capture entire frames at fixed intervals, the GenX320 detects only changes in a scene, reducing data rates while improving efficiency in motion detection. The sensor operates asynchronously, with each pixel responding independently to illumination […] ⌘ Read more

Radxa Expands SBC Lineup with ROCK 5T Featuring Dual 2.5GbE and Dual M.2 Slots
Radxa has introduced a Mini-ITX single-board computer designed for both consumer and industrial applications. Built around the Rockchip RK3588(J) processor, this SBC provides a broad set of interfaces, high-speed connectivity, and advanced multimedia capabilities. Unlike the ROCK 5B and ROCK 5B+, which use the same processor, the ROCK 5T is also designed for industrial applications […] ⌘ Read more

Vaaman is a $180 reconfigurable board with an Efinix Trion T120 FPGA and Rockchip RK3399
The Vaaman is a reconfigurable edge computing platform, first seen in 2023. The CrowdSupply campaign has finally launched, offering a system that combines the flexibility of an FPGA with the processing power of a six-core ARM processor. Designed for real-time processing and hardware acceleration, Vaaman integrates an Efinix Trion T120 FPGA with 112k logic elements […\ … ⌘ Read more

(Updated) NanoKVM-USB: 4K HDMI Loopback, USB 3.0, and Integrated Keyboard/Mouse Control
This month, Sipeed unveiled the NanoKVM-USB, described as a compact and low-cost device designed to simplify the operation and management of multiple systems. The Sipeed Wiki pages indicate that this device eliminates the need for dedicated keyboards, mice, or monitors. It allows users to perform operations graphically through the Chrome browser on a single computer, […] ⌘ Read more

M5Stack ASR Unit with CI 03T for Offline Voice Recognition in Smart Devices for $7.50
M5Stack recently launched the ASR Unit, which is an offline voice recognition module incorporating the CI-03T AI offline voice module. It is designed for applications that require speech recognition, voiceprint detection, and voice enhancement without relying on cloud-based processing. The product page for the CI-03T is in Chinese, but it describes the module as a […] ⌘ Read more

MINIX NGC-NR660 Mini PC with High-Speed 2.5GbE Networking and Triple Display Support
MINIX has recently launched the NGC-NR660, a compact yet powerful Mini PC featuring an AMD Ryzen 5 6600H processor and AMD Radeon 660M graphics. Designed for multitasking, gaming, and productivity, this system supports triple display output, 8K Ultra HD resolution, and dual 2.5GbE RJ45 ports for high-speed wired connectivity. The NGC-NR660 is equipped with 16GB […] ⌘ Read more

SECO Pi Vision 10.1 Brings Modular Industrial HMI with Raspberry Pi CM5
SECO S.p.A. and Raspberry Pi Ltd have introduced the SECO Pi Vision 10.1 CM5, an HMI solution powered by the Raspberry Pi Compute Module 5, debuting at embedded world 2025 from March 11-13 in Nuremberg. This modular system combines SECO’s hardware and IoT expertise with Raspberry Pi’s technology for industrial automation, smart retail, and transportation. […] ⌘ Read more

DietPi February 2025 News (Version 9.10)
The February 9, 2025 release of DietPi v9.10 introduces new images for single-board computers, improved compatibility for RISC-V devices, enhanced software tools, and several important bug fixes. This update extends support for StarFive VisionFive 2 and PINE64 Star64 with Debian Trixie, refines automation capabilities, and addresses software installation issues reported by the community. DietPi: DietPi […] ⌘ Read more

ESP32-S3 IR Thermal Imaging Camera Module with Wi-Fi and Bluetooth Connectivity
Waveshare recently launched the ESP32-S3 IR Thermal Imaging Camera Module which is a wireless infrared thermal imaging device based on the ESP32-S3-WROOM-1 chip. Designed with a compact form factor of 29 × 29mm, this module is intended for applications such as thermal monitoring, security surveillance, and industrial diagnostics.   The product page does not mention […] ⌘ Read more

NetCard 3 for H Series Expanding 5GbE Networking on ODROID H3 and H4
The NetCard 3 is an add-on network expansion card designed exclusively for the ODROID-H3 and H4 series, offering four high-speed 5GbE Ethernet ports. Maintaining the same size and mounting method as previous NetCard versions, it integrates seamlessly with compatible ODROID boards while delivering improved network performance. This expansion card is built around four Realtek RTL8126 […] ⌘ Read more

Axiomtek Introduces ROBOX300 Fanless Robotics Controller for Industrial AMRs with ROS/ROS 2 Support
Axiomtek has introduced the ROBOX300, a compact and energy-efficient robotics controller designed for Autonomous Mobile Robots. Powered by the Intel Core i5-1145G7E processor with a 15W TDP, it supports a 9 to 60 VDC input range and features a rugged, fanless design for industrial use.   As of this publication date, the ROBOX300 is only […] ⌘ Read more

ASRock Industrial Updates iEP-6010E Series with Super Mode for NVIDIA Jetson Orin NX and Nano
ASRock Industrial has upgraded the iEP-6010E Series and Developer Kit with Super Mode for NVIDIA Jetson Orin NX and Orin Nano, improving AI inference and efficiency. Optimized with NVIDIA JetPack 6.2 SDK, the system supports real-time processing for automation, surveillance, robotics, and smart infrastructure. According to the company, Super Mode enables the … ⌘ Read more

ARK Pi6X: An NDAA-Compliant Raspberry Pi CM4 Carrier with Integrated PX4-Based Flight Controller
The ARK Pi6X by ARK Electronics is a carrier board compatible with the compact Raspberry Pi CM4. This device integrates a PX4-based flight controller, a power module, and a 4-in-1 ESC mounting system into a single compact board, consolidating multiple UAV subsystems to reduce component complexity and improve integration efficiency.     This board functi … ⌘ Read more

Pineboards Introduces Modulo Carrier Boards for Raspberry Pi CM5 and CM4
Pineboards has introduced the Modulo4, Modulo5 Basic, and Modulo5 IO PoE+ carrier boards, adapting Raspberry Pi Compute Modules to the Raspberry Pi 5 form factor. These boards maintain compatibility with PCIe HATs, cases, and cooling solutions, with the Modulo5 IO PoE+ adding PoE+ support for network-powered operation. Pineboards indicates that with the release of the […] ⌘ Read more

BeagleBoard Shares Details on Linux-Ready and Wi-Fi 6/BLE BeagleMod Modules
BeagleMod is a series of solder-down modules designed for embedded computing and wireless connectivity. Developed by BeagleBoard.org, the BeagleMod AM62 is a Linux-capable processor, while the BeagleMod CC33 consists of Wi-Fi 6 and Bluetooth Low-Energy modules for Linux-based systems. The BeagleMod AM62 is a processor module based on the Texas Instruments AM6254, a processor already […] ⌘ Read more

ESP32-H2 Thread/Zigbee Gateway Module for Low-Power Wireless Communication
The ESP32-H2 Thread/Zigbee Gateway Module is a stackable development module designed for the M5 series hosts. It is based on the ESP32-H2-MINI-1 and supports Zigbee, Thread, and Matter. The module includes IEEE 802.15.4 wireless connectivity, making it capable of building Matter over Thread endpoint devices and supporting communication between different ecosystems.   The module features […] ⌘ Read more

Axon Platform Featuring RockChip RK3588S and Support for LLM Frameworks
The Axon platform, powered by the RockChip RK3588S processor, combines an 8-core CPU and an NPU delivering up to 6 TOPS of AI performance. Designed for advanced computing tasks, it supports various LLMs, including Llama, Qwen, and DeepSeek, with benchmarks showcasing performance for AI workloads. The Axon platform is built on the RockChip RK3588S system-on-chip, […] ⌘ Read more

SECO Introduces New Intel-Based Embedded Solutions at Embedded World 2025
SECO will unveil its latest embedded computing solutions at Embedded World 2025, featuring Twin Lake and Arrow Lake architectures. The lineup targets industrial, medical, and AI-driven applications, focusing on performance, scalability, and efficiency. Among the new products built on the Twin Lake architecture, the SOM-SMARC-TWL follows the SMARC form factor, offering a compact and modular […] ⌘ Read more

Ivy Carrier Board for Toradex Verdin SoM Family in Industrial Applications
The Ivy Carrier Board is designed for compatibility with the Verdin SoM family by Toradex. With a compact 130 x 105 mm form factor, it features dual Gigabit Ethernet, USB 3.0, Mini PCIe, industrial I/O, and MIPI DSI for display integration. Built for demanding environments, it supports an extended temperature range and a wide input […] ⌘ Read more

CAN FD Adapter for High-Speed Industrial and Embedded Communication in M.2 and Mini-PCIe Form Factors
The CAN FD Adapter enables high-speed CAN FD connectivity for embedded and industrial applications. Available in M.2 B-key and mini-PCIe form factors, it supports data rates from 12.5 kbit/s to 8 Mbit/s. It integrates with systems used in industrial monitoring, robotics, automation, hardware-in-the-loop testing, remote access, and data loggin … ⌘ Read more

GENE-MTH6: A 3.5” SBC with Intel Core Ultra Processors for Edge Computing
AAEON has announced the GENE-MTH6, a 3.5” SubCompact Board designed for edge computing and embedded applications. Featuring Intel Core Ultra processors (Series 1) with integrated Intel Arc Graphics, the board supports up to 96GB of DDR5 memory and offers PCIe Gen 4 expansion with RAID 0 and RAID 1 support. The GENE-MTH6 is built around […] ⌘ Read more

Pimoroni Interstate 75 W RP2350 Based Driver for HUB75 LED Matrices
The Interstate 75 W is a driver board designed for HUB75-style LED matrices and is powered by the RP2350 microcontroller. This board connects directly to HUB75 panels, offering a straightforward solution for creating LED displays for applications such as signage, data visualization, or interactive projects. The board is built around the RP2350A microcontroller, featuring a […] ⌘ Read more

Polverine Leverages ESP32-S3 and Bosch Sensors for Air Quality Tracking
Crowd Supply recently featured Polverine, a mikroBUS-compatible environmental sensing board for real-time air quality monitoring. It detects pollution, gas leaks, and supports ventilation control. Its compact, low-power design makes it suitable for portable and wearable applications, with Bosch Sensortec’s BMV080 PM2.5 and BME690 gas sensors providing data over Wi-Fi and Bluetooth via the ESP32-S3-MIN … ⌘ Read more

Adafruit CLUE: A Sensor-Packed nRF52840 Development Board in a micro:bit Form Factor
The Adafruit CLUE is a development board with a built-in display, multiple sensors, and Bluetooth Low Energy connectivity. It follows the form factor of the BBC micro:bit while incorporating additional processing power and expanded functionality. The board is designed for applications involving data visualization, sensor-based measurements, and wireless communication. This devi … ⌘ Read more

Metis Compute Board with RK3588 and AI Acceleration for Edge Applications
The Metis Compute Board is a compact single-board computer designed for AI applications requiring high computational performance at the edge. Built around the ARM-based RK3588 processor, it integrates the Metis AIPU for AI acceleration and features up to 16 GB of RAM, dual Gigabit Ethernet ports, and GPIO support. The board incorporates the Rockchip RK3588 […] ⌘ Read more

Axelera AI Metis Accelerator M.2 Now Available for Pre-Order at €179.00
The Axelera AI Metis M.2 is an edge AI accelerator designed for inference processing in compact computing environments. It features an AI processing unit within an M.2 2280 form factor, enabling real-time workloads on constrained devices. With support for multiple neural networks and AI pipelines, it delivers efficient performance while maintaining low power consumption. The […] ⌘ Read more

Meerkat Mini PC Supports Linux with Intel Core Ultra and Quad Display Output
The Meerkat is a compact mini PC designed to deliver high performance while maintaining a small physical footprint. It is powered by Intel Core Ultra processors and features Intel Arc graphics. The system supports multiple Linux operating systems, including Pop!_OS 22.04 LTS and Ubuntu 24.04 LTS, among others. The system is available with either the […] ⌘ Read more

EdgeBox Blue is a Compact Industrial VPN Router and IoT Edge Gateway
The EdgeBox-Blue is an industrial VPN router and edge gateway designed for applications requiring secure networking and data management in industrial environments. It runs on an OpenWRT-based platform and supports real-time data acquisition, automation, and cloud integration. The MT7981BA processor supports Wi-Fi 6 (IEEE 802.11ax) with a combined 1.8 Gbps throughput across the 2.4GHz and […] ⌘ Read more

SuperStationᵒⁿᵉ: Cyclone V FPGA Console for Retro Gaming and MiSTer Compatibility
The SuperStationᵒⁿᵉ is an FPGA-based gaming console developed for retro gaming enthusiasts and FPGA hobbyists. By leveraging FPGA hardware, it replicates classic gaming systems with a high degree of accuracy while providing flexibility for exploring multiple retro platforms. The console features a Cyclone V FPGA paired with 128MB BGA SDRAM, supporting the per … ⌘ Read more

Renode Enables Simulation of Ultra-Low-Power MSP430 Microcontrollers
Antmicro recently highlighted the MSP430 microcontroller family, renowned for its ultra-low-power design and versatility in applications such as IoT, automation, and space. Their article explores how the Renode simulation platform facilitates efficient testing and development of MSP430-based systems. The Texas Instruments MSP430 is a cost-effective, ultra-low-power family of microcontrollers with a custom i … ⌘ Read more

FRDM-IMX93 with Arm Ethos U-65 MicroNPU Runs on Debian Linux
The NXP Semiconductors FRDM-IMX93 Development Board is a development platform designed for industrial and IoT applications. Key features include dual Gigabit Ethernet ports, multiple display and camera interfaces, and support for CAN bus communication. The board is built around the i.MX 93 applications processor, which integrates dual Arm Cortex-A55 cores operating at 1.7GHz and an […] ⌘ Read more

ESP32-S3 Development Board with 2-Inch Display, Camera Interface, and 6-Axis IMU
The ESP32-S3-LCD-2 is a compact development board based on the ESP32-S3R8 processor. It integrates features such as wireless connectivity, a small LCD display, and various interface options, including a battery connector for portable applications. The board is especifically powered by the ESP32-S3R8, a 32-bit LX7 dual-core processor with a clock speed of up to 240 […] ⌘ Read more

Super Watchdog Raspberry Pi HAT with Battery Backup Gains Multi-Chemistry Support
The Super Watchdog HAT with UPS Battery Backup provides power management and reliability for mission-critical Raspberry Pi applications. It supports all Raspberry Pi models, ensuring uninterrupted operation, data protection during outages, and system monitoring. The latest release for this HAT introduces multi-chemistry support, allowing compatibility with a range of 18650 battery … ⌘ Read more

Tang Console: Compact FPGA Platform for Development and Retro Gaming
Sipeed has recently launched the Tang Console, described as a compact FPGA platform designed for developers and hardware enthusiasts. It offers a flexible and portable solution for applications such as hardware prototyping and retro gaming system emulation. The device is available in two configurations. The 60K variant includes 60K LUTs, 468Kbit SSRAM, and 2Gb DDR3, […] ⌘ Read more

Toradex Adds SMARC iMX8M Plus and iMX95 to Its Embedded Portfolio
Toradex has introduced a new System on Module family to support projects requiring the SMARC standard. Featuring connectivity, advanced multimedia, and machine learning capabilities, the modules are compatible with Torizon Embedded Linux, offering long-term support and secure remote management. The SMARC iMX8M Plus incorporates four Arm Cortex-A53 cores at 1.6 GHz for general processing and […] ⌘ Read more

UNIT DualMCU One with RP2040 for Real-Time and ESP32 for Wireless Connectivity.
The UNIT DualMCU One is a development board that combines the ESP32 and RP2040 microcontrollers. The ESP32 provides Wi-Fi and Bluetooth connectivity, while the RP2040 offers hardware control with flexible GPIO, supporting applications in IoT, robotics, and automation. The RP2040 features a dual-core ARM Cortex-M0+ processor running at 133 MHz, offering compatibility with Arduino UNO [… … ⌘ Read more

VersaLogic’s Sabertooth AI Combines Xeon-E Processor with NVIDIA RTX GPU
VersaLogic Corp. has introduced the Sabertooth AI, a compact and rugged embedded system designed for AI inferencing and high-bandwidth video applications. Featuring DDR4 ECC memory, dual GbE, and support for multiple displays, it delivers high computational performance in a small form factor for industrial and edge computing. The Sabertooth AI incorporates an Intel Xeon-E processor, […] ⌘ Read more

HackCable: USB-C Keystroke Injection Cable with RP2040 or ESP32
Kickstarter recently featured the HackCable, a USB-C cable designed for cybersecurity research and system testing. It resembles a standard charging cable but includes features like built-in Wi-Fi and keystroke injection, providing a discreet and versatile tool for professionals and researchers. HackCable is available in two versions, each powered by a different microcontroller: the ESP32-S3 or […] ⌘ Read more

LLM630 Compute Kit with Wi-Fi 6, GbE, and LLM Support for Edge AI
The M5Stack LLM630 Compute Kit is a development platform targeting edge computing and intelligent applications. It features Gigabit Ethernet, Wi-Fi 6, camera support, and expansion interfaces, designed to handle tasks such as computer vision, large language model processing, and other embedded applications. According to the product brief, the AX630C is described as an SoC with […] ⌘ Read more

PocketBeagle 2 Offers Compact Design with AM6232 Processor
The PocketBeagle 2 from the BeagleBoard.org Foundation introduces a compact design paired with enhanced performance and connectivity features. Built on the AM6232 processor, this board provides a 64-bit platform within the established PocketBeagle form factor. According to a 2023 presentation, the PocketBeagle 2 is powered by the AM6232 processor, which features dual ARM Cortex-A53 cores […] ⌘ Read more

Orbbec Unveils Gemini 215 Stereo 3D Camera and Pulsar SL450 at CES 2025
At CES 2025, Orbbec introduced the Gemini 215 Stereo 3D Camera and the Pulsar SL450 dToF Single-Line LiDAR. The Gemini 215, designed for high-precision scanning, features depth measurement accuracy of less than 0.5 millimeters, multi-camera synchronization, and a lightweight build, making it suitable for various short-range 3D scanning applications. The Gemini 215 is engineered for […] ⌘ Read more

ASRock Industrial Introduces 4X4 BOX AI300 Series with AMD Ryzen AI Processors
ASRock Industrial has introduced the 4X4 BOX AI300 Series, a compact system built around AMD’s Ryzen AI 300 Series processors. This fanned system includes features such as 2.5GbE and 1GbE ports, support for four displays, and flexible storage options. The 4X4 BOX AI300 Series incorporates AMD Ryzen AI 7 350 and Ryzen AI 5 340 […] ⌘ Read more

RISC-V Based Milk-V Oasis Gets Canceled and Refunds Are Issued to Supporters
The Milk-V Oasis, a highly anticipated RISC-V-based Mini-ITX motherboard, has been officially put on hold. Despite its promising features and bold vision, the project was suspended indefinitely due to development challenges and uncontrollable factors, according to the Milk-V team. First announced in October 2023, the Milk-V Oasis was designed around the Mini-ITX form factor. It […] ⌘ Read more

Luckfox Brings Linux to Stamp Form Factor with Rockchip RV1106 Processor
The Luckfox Core1106 is a compact development board built around the Rockchip RV1106 chip. Designed to simplify hardware integration, it allows developers to efficiently verify designs or embed the board into products. With dimensions of 30 × 30 mm, the Core1106 is suitable for applications such as edge computing, IoT devices, and video processing. The […] ⌘ Read more

Cubie A5E with 4K Video Support and M.2 NVMe SSD Now Available for Preorder
Radxa recently launched the Cubie A5E, a compact single-board computer measuring just 56 mm x 69 mm. Designed for both consumer and industrial use, it combines 4K video support, AI vision capabilities, and efficient processing in a portable form factor. The Cubie A5E is powered by the Allwinner A527 (consumer version) or T527 (industrial version) […] ⌘ Read more

Voice Preview Edition: Open-Source Design with Local Processing Capabilities
The Home Assistant Voice Preview Edition is an open-source voice assistant designed for integration with Home Assistant systems. It emphasizes privacy, local processing, and compatibility with smart home hardware, offering reliable performance and flexible usability. The device features dual microphones and an XMOS XU316 audio processor for advanced capabilities like echo cancellation, noise … ⌘ Read more

Upcoming JF35 MTU1 Low Profile 3.5″ Motherboard with Intel 14th Gen Core Ultra Processors and Dual 2.5GbE LAN
The JF35-MTU1 is an upcoming 3.5-inch form factor motherboard designed for industrial applications, including control systems, robotics, and digital signage. Built around Intel’s 14th Gen Core Ultra processors, this board is expected to offer a balance of performance, connectivity, and durability for challenging operat … ⌘ Read more

Cost-Efficient PICO2-XL and PICO2-XXL OSHW Boards Now Available for Pre-Order
Olimex has announced that the highly anticipated PICO2-XL and PICO2-XXL open-source hardware boards are now available for pre-order, with shipments starting on January 17, 2025. These boards expand on the Raspberry Pi PICO2, offering increased GPIO availability and improved memory configurations for enhanced development flexibility. First introduced in November 2024, the PICO2-XXL features … ⌘ Read more

Pine64 Starts 2025 with January Community Updates on PineVox and More
As 2025 begins, Pine64 has provided a community update for January. This month’s updates include progress on the PineVox, ongoing developments for the PineNote, and the release of InfiniTime 1.15. PineVox Progress Development of the PineVox firmware has seen significant advancements. The device can now connect to Home Assistant, detect wake-up commands, and process inputs. […] ⌘ Read more